I have seen these on eBay for real cheap. I own a 90 Passat and have had to do lots to the doors locks but not change the handle. You'll have to start from the inside first, remove the door panel which only has 2-3 screws on each side. If you order one on ebay, or wherever, the unit should include further instructions. Remember that your key will not match doing it this way. If you want the key to match you need to contact a locksmith. Not knowing exactly why you need to do this a locksmith may be your best bet as they will match all the doors to one key or your existing key.
Trying to repair a heater core can be a waste of time. Just replace it with a new one.
I've included a link to an auto repair video below that will show you exactly how to replace the taillight in your Volkswagon Passat. See sources and related links below for bulb information.
You would need to take off the door panel in order to remove it. I've included an auto repair video in "related links" down below that will show you exactly what needs to be done to replace it on your 2000 Volkswagen Passat. Hope this helps you out.
First... get a repair manual. Follow the instructions...
I don't know the answer but any glove box lock is a joke. I would just replace it but never lock it.
Remove inner door panel for access
Wiki u disappoint me! Use another search engine!
Check coolant sensor for corrosion at the wires or the sensor itself . If corrosion, replace sensor or repair wires.
It could be coming from your heater core, may need to repair or replace it.
Replace the window regulator.
stick some thin wire down the holes
Its under the car right under the drivers seat. how do we fix/replace/repair it
How to replace a motor driver side for a town and country 2002
replace the power window motor inside the door. You will have to drill out the rivets and replace with nuts and bolts
this is a expensice repair, labour is difficualt and part is expensice, somwhere around $600 is the low end.
Replace driver's switch assembly
Replace the outside door hanle,but first pull the interior door panel to see if the out side door handle linkage is busted.
You must replace the assembly/ or the entire door unit
buy a new valve
http://www.taligentx.com/passat/maintenance/doorlockmechanism/ try this link it wil be helpful
Proteins repair and replace cells.
You don't. This is not a DIY repair. Working on the SRS can be very hazardous and is best left to a professional.
You will need to remove the door panels, and look up in the door at the handle you will see two nuts that hold the handle and a plastic clip on a rod, remove those and replace handle.