How do you repair headlight on a 1985 s10 blazer that dont work at all?

Have you checked that the headlight switch is working properly?

you dont really repair it more like replace it its one of those things that either work or they dont you could maybe repair it for i while but ill bet youll be replaceing it down the road.

That is a must, It has to have fluid in it are it will burn up.

The headlight socket is made into the headlight assembly. You have to change the whole headlight. If you dont have mech experince then i would let a shop do it because its easy to change but the new one has to be aligned using the adjustment screws. This can be a pain if you dont know what your doing. The headlight socket is made into the headlight assembly. You have to change the whole headlight…

you can iron over the badge on the blazer the it should stick on it if it dont then you have to sew it on your blazer

it cant they dont have one.

YOU DONT repair them

You dont repair it...you have to replace it.

I dont know, why dont you tell us, so we can help you?

DONT EVEN TRY IT THE HEADS ARE DIFFERANT BUT THE BLOCK IS BASSICALLY THE SAME BUT ITS NOT WORT THE HASSEL DONT EVEN TRY IT THE HEADS ARE DIFFERANT BUT THE BLOCK IS BASSICALLY THE SAME BUT ITS NOT WORT THE HASSEL

hi i have a 2003 blazer and last year the same problem happen to me,just change the coil...i dont know if its your solution but it work for me

Dont repair...just replace it for your safety!

nope nada dont hava one nope nada dont hava one

no they dont

no they dont

you dont..they are set in a harness in the back of the headlight assembly which is locked in place..you turn it to unlock it and remove it.

you might check for a blown fuse.

dont think it has one, or dose it,

you can take it there and they can send it to have it repair but they dont do repair at the store

i dont know, why dont you go find out yourself you lazy piece of crap ^hahaahaha!!!!

you dont. have it replaced

trans or oil? oil is in front left. i dont think the 98 blazer has a trans dipstick. Instead, there is a bolt on the side of the trans.

Not on their own they dont. They can repair though.

i have a 99 dodge sport ram 2500 passenger side headlight is not bright and the two in side lights dont come on at all why?

i dont know but it seems kinda hard

you dont. go get a 2 wheel drive if your going to lower it

you dont unless you glue it again, if wanting to replace head lights then, on top of headlight assembly there are 2 tabs to pull up. then remove assembly.

You dont have to repair it, just get the amulet from the guys neck by winning it.

Yes dont download it i did them cheaked with my computer repair guy and it is ked with my computer repair guy and it was

repair manuals i dont have a repair manual I have a manual, but it doesn't answer the question either.

i dont have no power to my starter solinode wont start its a 1985 camero

Here's how to test and repair power windows http://www.ricksfreeautorepairadvice.com/repair-topics/window-power-repair/replace-a-power-window-regulator

You dont, you replace them.

dont know exact size , but it is a metric size

To be honest you really dont. If you are tring to repair one post that ?'s and maby i can help you with that. To be honest you really dont. If you are tring to repair one post that ?'s and maby i can help you with that.

you have to take it to a repair shop if you dont know why it does that & the people at the repair dont know what the heck is wrong with it. Sell it buy a new one and shut the f*** up .

its really a heavy duty switch that is told to come on or turn off by some other signal eg your existing headlight switch if you dont use one you will burnout the headlight wiring

well you dont repair the gasket itself you just replace them.

DDIY means dont do it yourself, ask Anojan

undo all 3 11mm bolts on headlight case. . Unplug the 2 plugs on back of headlight. . ull feel a button "clip" that when pushed lets u disconnect the cables. . u can do this after wrigling out the headlight abit. . . Once the unit is out unscrew that big cap. . unclip headlight socket and take out headlight and DO NOT TOUCH!! unleas its broken and u dont want to keep it…

most times you dont have to.. try to access it from the engine side of the light

I dont think so but maybe if you condition it alot or get magic shampoo for that type of hair then it might repair temporarily

You slide the clips upward..this releases the locking mechanism. Pliers may be helpful..but dont pull too hard on the clip..or the plastic might break on the headlight housing. The clip remains in the track..dont pull the clip all the way out.

go to helm inc.com and order one from helm. They dont have one! Dont bother!

you dont, if you want to disconnect it then remove your front drive shaft.

Electrical problems are the worst, but mechanicly its strong and they usually dont rust.

Get it repaired at your local car repair shop.

i dont think so

Research whats wrong, or send it to a repair shop.

the wiper dont work