How to repair the rear door latches on my e 350 van. The bottom latch will not hold . How do I get the latch to hold Thanks
power lok actuators are located on door latch don't understand repair?
My 1997 e350 has 6x8
if you look on the tag that is on the drivers door under the door latch it should tell you it should be over 9000 pounds.
weight limits should listed on the driver door. just open it and look at the end of door or it may be on the jam just below the latch.
It is very easy to repair a broken glove box latch. Once you've acquired the part, you will need to take the inner and outer panels of the door apart. The latch is attached to the outer panel of the door. It can be removed with a couple of screws.
there is aq clip whivh is located on the rod going from the door handle to the door latch just find the clip and put back in is broken like mine i made a clip and it has not broke since.
inside the door latch itself
on the end of each door , visible with the door open
Pull the door panel off, remove the door latch assembly from inside the door, and replace the switch which is hold onto the latch with one screw on the backside of the latch.
the door ajar switches are part of the door latch assembly in the door
door catches on a latch partly open how can it be repaired
1A Auto