If the leak is around a fitting and you can see it, then it may be repairable. Unfortunately many heaters leak at the welded seams and there is no satisfactory repair for that. You may well need a new heater.
A lapped seam is one of the four major types of seams. The types of lapped seams are bound seams and Hong Kong seams.
You cant buddy..Have tried everything but u simply cant..not at the presure that the ball has to be at
Because they did not know that seams were important yet. They find out that seams are very useful so they then added seams
I am not sure why it has different sized seams but I know why it has seams. The seams help it spin . When you spin it it goes faster. try researching
form_title=Wallcovering or Wallpaper Repair form_header=12123 Please specify which problems are in need of repair.*=  Peeling  Bubbles  Rip  Exposed seams  Water damage  Holes  Other Is there any additional matching wall-covering stocked with you?*= () Yes () No
Yes, they are called coal seams.
Cricket ball has 4 seams.
Well it depens of how tall you are but that seams ok.
Most sewing projects use plain seams. The other specialty seams are used for specific projects, such as decoration or strength.
six 4 seams
There are many reason for the leaks, either corrosion, freezing, shaking, etc. They can usually be repaired by draining the fluids, then removing the radiator and cleaning the seams, or pin holes areas with a fine wire brush, steel wool, scotch brite or something similar, then re-soldering the area. Another solutiuon would be to take it to a radiator shop where they will dip it to clean the inside well, then repair the seams. Radiators in most newer cars can't be repaired because of the way they are made(mostly plastic and aluminum. The best way and ONLY way to repair a leaky radiator is to replace it. Repair it and you will be repairing it again and again.
because you don't need real seams to make a basketball.
there is one big one that goes all around the ball
The Patriots wide receiver went through the defensive seams down-field.
In sewing, seams are formed by joining the fabric together to create a finished product.
Grip it across (or against) the seams. Gripping it with the seams will make it curve.
The cast of Seams - 1993 includes: Fernando Linares
Can't be done. The seams are sealed together by the factory with a certain amount of heat and pressure.
to finish seams and edges, make buttonholes, and to sew special seams.
it's just yarn, but they are called seams. "The pitcher grips the seams of the ball"
I have used heavy duty upholstery thread and needles and REALLY good thimbles. It takes some serious hand strength and a ton of patience, but it works.
Most seams face inward because they are unattractive . The seams on undergarments face inward so the seam is less noticeable on the outside of your clothes (and when you're outside your clothes).
The seams on a baseball help the ball curve when a slider or some other breaking pitch is thrown. The seams catch the air and make the ball move when thrown correctly.