check the fuse box you could have a blown fuse or a relay may be out referr to your owners manual.....rosdale joe
If your gas gauge is not working on your 2000 Impala you need to take it in to a repair shop. There could be a fuse that needs to be replaced to prevent you from running out of gas.
What year impala? For 2000-2004, the actual ground wire is Pin F on the heated seat relay driver (control module) located underneath the seat. That ground wire comes from the main harness coming from underneath the carpet to the seat, and ultimately ties into a body bolt below the drivers opening, rear of the left A pillar.
vapor canister is located behind the rear drivers side wheel
Look on the drivers door post and there is a decal telling what the pressure should be.
I had a problem with stalling with a 2000 Impala, and it was the oxygen sensor.
Impala HQ .com
2000 chevy impala sterio wireing color codes
Check the coolant system to make sure you have enough antifreeze. Also is your thermostat working?
What are the torque specs for 2000 Chevy Impala 3.8 Litre ?
what is the proper way to wire the starter for a 2000 chevy impala
where is the ac vacuum line on a 2000 impala ls> Yes I need to know about a LS
Trouble code P0401 means: Insufficient EGR Flow Detected Replace the EGR Valve
According to Automobile online In August 2010, a recall for faulty seat belts and anchorage was announced for the 2000 Impala. Another reason the Chevy 2000 Impala was recalled was problems relating to the suspension.
The 3.4 and 3.8 litre V6 engines in a 2000 Chevrolet Impala have a timing CHAIN
On a 2000 Chevy Impala, the fuse box is located on the edge of the dash, just inside the drivers side door To take the panel off, place your fingers in the indentation and pull straight off. If you are having trouble, you can use a screwdriver to gently pry it off.
you cannot service panel lights on 2000 impala . you hav to replace the instrument cluster.
i have the 3.4 liter 2000 impala and its up against the top of the firewall towards the middle of the engine
How do I install a turn signal switch for a Chevy 2000 Impala? WHere is the old part that I need to replace?
The 2000 Chevy Impala has a curb weight of 3389 lbs. The vehicle has a towing capacity of 1000 lbs.
The check engine light problem will have to be repaired in order to have someone with a scanner to reset it. If the repair is not made then the light will come back on immediately.
No. The 2000-2005 Grand-Am uses a 4T45-E TRansmission, while The 2000 - 2005 Impala Use a 4T65-E.
Sorry but your question makes no real sense. The 2002 Kelly Bluebook price on a 2000 Impala is of no consequence in 2007. If you are wanting to know what a 2000 Impala is worth today, then go here. www.nada.com
somewhat..... between 400-700 dollars If you let someone do it. price depends on your engine the 3.8 or the 3.6L. Shop around.
The Chevy Impala did not come out in 2004. The eighth generation Impala came out in 2000 and then the ninth generation Impala came out in 2006. The tenth generation is expected for 2014.
How to repair power window in 2000 Ford Ranger passenger window will not work with either drivers button or passenger button the relay does not make any clicking noise either What is wrong?