How do you replace 1977 Chevy truck control arm bushing?
burn rubber out and cut shell out of the arm bushing hole
freeze new bushing in freezer
grease hole well
tap or press new bushing into arm bushing hole
u have to pull the driveshaft knock out the seal and install a new one, but if it is leaking the bushing needs to be replaced and u would need a bushing driver to install it. u can purchace a seal and bushing kit but the bushing is harder to replace
Most of the time it is the bushing in the top of the column. . Pull the steering wheel off,pull the locking plate for the steering wheel,pull the blinker assembly,then you will come to a stiff spring that preloads the bushing under it..... That bushing,and spring need to be replaced,and you have cured your problem. . . . .
how long does it take to replace a carburetor on a chevy truck?
replace heater core in a 1991 Chevy work truck 1500
Where is the fusible link in a 2005 Chevy HD truck
Yes there the same.
possibly your front upper control arm bushing are out.
Remove bolt, washers and bushing and replace with new. It is pretty self evident. Remove tire and put suitable support under a arm to keep spring compressed. Use normal caution when working around suspension parts as the can be loaded by spring pressure. Removal of the stabilizer brackets and bushing makes the job easier but isn't really necessary.
how do replace a power steering hose on a Chevy c-1500 pickup truck
need diagram for heater core for a 1994 Chevy truck.
Most of these are not intended to be replaceable. To do it requires a person capable of disassembling the switch, and soldering in new bulbs or LEDs
You need to periodically replace the headlights on your Chevy truck when the headlights start getting dim. You can purchase replacement headlights from retailers such as Parts Source.
A chevy 3500 truck is not front wheel drive, so it does not have CV joints.
replace ighnition switch for 1985 chevlot
I do not know lol
trottle control module
NO you can not. It MUST have the 4L60E put back in it. Because of the computer system.
Could you replace the complete dashboard in a 92 Chevy 1500 truck with a newer one from a 95 Chevy truck?
Answer no the wiring harness in your 92 model truck will not fit correctly into the newer dash. to replace the dash you are going to have to change over the wiring harness, both doors, and the steering column.
If the head is removed you must always replace the bolts.
the cruise control is broken....
tighten your trucks alot or unscrew the truck and take off the bushing and snap it or something.
How to remove and install the serpentine belt on 1991 Chevy Blazer with AC?
you have a bad control module, and check that coil resistance, cause they will fire but not how it should!! should be a good strong blue spark, if not replace it!
Take it to the dealer. Take it to the dealer.
what is the boxing compass
replace the worn parts.
It will take and experience mechanic six hours to replace your 1996 Chevy truck flywheel. A novice mechanic will take several more hours.
how do you replace3 dimmer switch 1987 chevy silverado 4 x 4
i need a diagram of how to inslall the belt on my truck
When it goes out. But it will probley out last the truck itself.
Unplug them and put a wrench on them and screw them out.
Can you replace your 4L80e Chevy transmission with a 700r4 Chevy transmission it is in a Chevy truck?
Not without major modifications. The 4L80E is shifted electronically, while the 700r4 is not. can you specify what kind modifications?
It unbolts from the inside of the door, so, you have to pu;ll the little inside panel. It just pops out.
Yes as long as the 99 is the OLD body style.
how to replace the rear seals on a 1991 Chevy S-10 pick-up truck
Evaporative Emission Control System Malfunction
Can a 1991 1500 Chevy truck 6 cylinder motor be replace in a 8 cylinder motor 1993 1500 Chevy truck?
Sure, You will have to change everything,motor mounts,computer,wire harness, exhaust, etc...
You will have to replace it. The bearings are worn out in the blower motor.
It is built into the alternator It is all 1 unit. Replace alternator.
if its like my truck you have to take the grill and the whole headlight assembly out to replace it good luck
Probably needs lubrication and the control cable adjusted
It should be at the base of the throttle body.
... I am wondering the same thing. I need to replace mine in a '96. ... I am wondering the same thing. I need to replace mine in a '96.
You will have to take the transmission out of the truck first. Then look up in the bellhousing and you will see it. It just pulls off with your hand.
buy a tap and die set.
Replace the high speed relay.
It would depend on what year the truck was made.
Sounds like you need to replace the thermostat.
About 15 mins. That's a easy job.
Labor book says 8.9 hours.