if you have 2.4l dohv engine, remove the intake tube ,then there is a rectangle black cover with 4 bolts,take that off and you will see spark plugs under it with deep shafts to the plugs.
Four.
I own a 2002 Kia Sportage, I get 23-24.5 mpg every tank of gas after i changed spark plugs it has 60,000 miles on it
Disconnect the battery, remove the engine cover, remove the spark plugs wires and boots, and remove the spark plugs. Put in the new spark plugs, replace the spark plug wires and boots, replace the engine cover, and connect the battery.
Remove the spark plug wires from your 2002 Mercury Grand Marquis spark plugs. Remove the spark plugs by turning them to the left with a deep well 5/8 socket. Reverse the process to install the new spark plugs.
Disconnect the battery, remove the cover, remove the spark plug cables and boots, then remove the old spark plugs. Put in the new spark plugs, replace the cables and boots, replace the cover and connect the battery.
To change spark plugs on a 5.9 2002 Dodge Ram 1500, locate the old spark plugs. These are located at the end of the 8 wires inside the vehicle's bonnet. Remove the old spark plugs and replace with new.
Disconnect the battery, remove the spark plug cables and the boots and remove the spark plugs. Put in the new spark plugs, replace the cables and boots, and then connect the battery.
Disconnect the battery, remove the spark plug cables and boots, and remove the old spark plugs. Throw out the old spark plugs, Put in the new spark plugs, replace the spark plugs cables and boots, and reconnect the battery.
They will be on top of the engine underneath a black plastic cover. You have to remove the air intake and hose to get to it.
Replacing spark plugs is pretty simple. Disconnect the battery, remove the cover and cables, remove the old spark plugs, put in the new spark plugs, put the cover and wires back on the spark plugs, and reconnect the battery.
How do you change the spark plugs on a 2002 chavy trailblazer
Generally, to replace spark plugs on a Subaru vehicle, the spark plug boot should be removed. Then, the old spark plugs should be removed using a socket wrench, and replaced with new ones.