first you need to remove the serpentine belt. best way to do this is to use a serpentine belt tool. then its actually very simple, there are three bolts that hold it in one up front, and two in the back, and then there is a plug on the bottom you have to unclip.
If the horn does not work on a 1996 Oldsmobile Ciera, you can replace the horn. Almost any type of horn should be compatible.
can i reset it or replace it ,where is it on the car
Yes, you do.
how do you replace the headlight switch on a 1993 cutlas ceria*
The low pressure valve to put in 134a on a 1994 Oldsmobile Cutlass Ciera V6 is on the passenger side of the engine compartment. It is about 12 inches below the alternator.
Simple, just replace your alternator..
It is integrated into the alternator, if it is bad you will need to replace the alternator.
wher is the TPS located on a 96 oldsmobile ciera 3.1L ?
How do you tighten the serpentine belt on an oldsmobile ciera
Where is the signal flasher located on a 1987 Oldsmobile Cutlass Ciera?
how to installing a turn light switat in 1995 Oldsmobile ciera
It's on the firewall up high on the passenger side. You may need to remove the alternator to get it out.