how do you reset the pdc on a bmw
hold pdc button for 10 second and start car whilst pressed
The Park Distance Control, or PDC, is a set of sensors that allow a driver to assess the distance of an object behind them when reversing, generally to park. An acoustic signal, starting at a low frequency, increases frequency as the driver gets closer to the object (car) behind them. If one lives in a wet, snowy or very cold locale, the PDC is known to freeze up, (incorrectly) triggering the PDC FAILURE message. One's should first defrost and/or dry the PDC module (located in the trunk of the vehicle) with a hairdryer, fan or other ambient (and not dangerous) heat/air source. If the PDC FAILURE message stays on, then one may need to replace the sensor.
it means the PDC (park distance control) does not work properly, could be damaged or faulty, could also be a coding problem. This ideally needs to be checked at your local dealer. Adamski (adam.francis@snowsgroup.co.uk)
the radiator fan relay?is this a 1500 ram.if so the relay is an internal part of the pdc and the fcm which is the computer module that controls most electrical items in the truck.check fuse 39? in the pdc if its blown replace it and get the updated fan asembly and pcm update from your local dealer.
The power distribution center is the under hood fuse box.
if it is a 2003- on e60 it is right rear of boot/luggage area behind cover where battery is located under fuseboard
how many terms for pdc
p= park d= distance c=control
dsquery server -hasfsmo pdc
Call Paulding PDC at 770-443-7807
PDC World Championship Darts happened in 2007.