If it is after 1995 mark 4 it is easy bolt on, if earlier it needs cuttting and welding
Whats the cost of a new drivers side wing mirror for the new ford fiesta
undo the 2 bolts then fit your new mirror and tighten the 2 bolts u fecking numpty!
Fitting wing mirror to MK4 Fiestatuff luck
just drill the spot welds out it takes a while but pretty easy really
Replacing the front wing on a Peugeot 307 you should find a replacement part and consult the cars manual. Line up the new front wing, bolts and clips.
it is behind the lights, accessed from inside the boot, behind the side covers.
you take te old one out
Front Wing was created in 2000.
Open the hatch. Remove the two screws that are securing light. Peel back the carpet from the side of the boot area where it meets the side plastic trim. Remove the plastic wing nut from the rear of the light. Remove the light and unclip the harness plug to allow for complete removal of light from the vehicle. Replace bulbs as required.
go to the ford dealer and buy a new one and glue it on with no more nails from homebase and jobs a good un. happy to help
Ok you will need to take the three bolts off from the top of your wing under the bonnet (not the two large bolts at the top as those bolts are for the bonnet arm). You will then need to take the three bolts from the side of the wing these can be seen when you open the door from behind the wing. The last bolt is at the front under the bumper (you shouldn
On a 205 gti, you have some bolts along the top of the wing(under bonnet shut line), also 2 or 3 along back side of wing(behind door shut), and then some mastik type stuff on inside of wing itself :)