0
How do you replace a blower motor resistor in a 2001 Dodge Dakota?
Wiki User
∙ 12y ago
It's actually pretty simple, anyone with a screwdriver can do it. The resistor is located under the dash on the passenger side of the truck. You have to look at it from the floor to see it. It will have a 5 wire harness connected to it and will be held in by two screws, it's about the size of a deck of cards. Just unplug the wiring connector, then unscrew the 2 retaining screws and pull it out, then screw in the new one, plug it in and test your blower on all speeds. DONE.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Why does your replaced electric AC fan on a 2001 Dodge Dakota not run?
replace the blower fan resistor and you`ll be okay
Where is the ac blower resistor on a 87 dodge Dakota?
It is under the hood in the passenger side firewall.
Why does only the high speed setting on your 2001 Dodge Dakota work while the other 3 settings do nothing?
The blower motor resistor pack is defective. Replace it.
2002 Dodge Dakota no low fan speeds just high speed?
Not always, but 99% of the time this is a sign that the Blower Motor Resistor Pack is defective. Replace it.
Where is the blower motor resistor located on a 1998 Dodge Dakota?
Under the dash, far passenger side.
98 dodge caravan how to replace front blower resistor?
The front blower resistor on a 98 Dodge Caravan is replaced by removing the cover and disconnecting the wiring harness. The resistor can then be pulled and a new one put in its place.
How do you replace the wire harness for the blower resistor on 2001 dodge durango?
With great difficulty!
What does it mean if the blower fan in a 2001 Dodge Intrepid will only work on high speed?
replace the blower motor resistor
Why is your blower only works on the highest setting on your 2001 Dodge Durango Sport?
You need to replace blower motor resistor.
1998 dodge stratus you replaced the blower motor resistor and your blower motor still works on high only?
replace the blower motor switch
Where is the heater motor resistor in a 1995 dodge Dakota?
Diagram for location of blower motor resistor can be found herehttp://autorepair.about.com/library/images/bl441a-lib.htm
How do you replace a blower resistor in a 1998 Dodge Intrepid?
Remove plastic air duct from under passenger side dash, and you will see a white ceramic rectangular resistor with a couple wires sticking out on the firewall by the blower motor cover. Remove screws on the resistor and remove wires to replace.
