Headlights Tail and Brake Lights
Chevy Blazer
VW Golf

How do you replace a brake light bulb for a 2002 dodge ram 1500?

252627

Top Answer
User Avatar
Wiki User
2011-09-12 20:42:37
2011-09-12 20:42:37

Lower the tailgate. Remove the two screws on the inside to the side of the lamp assembly with an torx wrench. The tail lamp assembly will pop out. Remove the four screws on the backside of the tail lamp with a Phillips head screwdriver. You now have access to the bulbs.

12
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

Some brake light switches are only adjustable once.

User Avatar

The "3rd" brake light has been out since at least 1994.

User Avatar

To replace the brake light switch on a 1995 GMC Sierra 1500, the steering wheel will have to be dismantled until the brake light switch is reached. The switch is changed by unplugging it and plugging in a new one. There are screws holding the switch in place.

User Avatar

If the parking brake pedal on your 2001 Dodge Ram 1500 is stuck to the floor, you might have broken the parking brake cable. Remove the rear tires to see if the cable is still attached and replace it as needed.

User Avatar

The ABS computer has detected an electrical or mechanical malfunction. You need to have it checked for codes.

User Avatar

normal wear and tear. Brake light switch, bulbs or sockets.

User Avatar

It is on a bracket above the brake pedal. It reads off of the brake pedal.

User Avatar

Defective Master Cylinder or broken brake line. Replace the master cylinder and bleed the brakes.

User Avatar

2011 Dodge Ram 1500 brake light bulb replacement: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake light bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).

User Avatar

If you are talking about the tail light the lens is not a separate part of the lamp assy. Replace the complete assy by removing the two screws on the outside and unpluging the lamp socket.

User Avatar

Replace brake lines or wheel cylinder which ever is leaking

User Avatar

autozone.com has online manuals you can access for free

User Avatar

2009 Dodge Ram 1500 Pickup brake light bulb replacement: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake light bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).

User Avatar

The abs computer has detected a malfunction and set a code. Have it checked for codes.

User Avatar

Tail and stop bulb = 3057 Park and turn bulb = 3157NAK

User Avatar

My 2007 Dodge Ram 1500 As just shy of 78,000 miles on it with the original brakes I will be putting new brake pads and rotors in today

User Avatar

If the truck has disc brakes on the rear then the park brake shoes are located inside the rear rotors. You have to remove the brake calipers, pads and rotors to access them

User Avatar

Worn brake pads can cause the brake light to blink on the dash in a 1993 GMC Sierra 1500. This can also be caused by a faulty light.

User Avatar

To the best of my memory you have the brake line bracket mounted on it then the stud in the houseing and it slips out

User Avatar

A 1998 Dodge Ram does not have EGR.

User Avatar

One or more of the tail lights, head lights, or brake lights is out.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.