I would recommend you replace the entire hinge and forget about repairing it. In my experience this is the best route to take.
Replace the hinge pins and bushings.
I need passenger door hinges for my chevy aveo 2007
take door panel off
Replace door moulding
How do you change the door hinge pins and bushings on a 2002 GMC 1500 pickup truck?"
A guy I met who does body work told me that you impact the door pins out of the hinge. the bushings go bad on them so it causes the door to sag and not close properly. I just don't know if you have to impact hammer them from the top down or bottom up. I think its from the top down. post back if this is right or not. I need to replace the pins on my driver side door too.
Your local auto parts store can sell you an inexpensive tool to remove and replace that door detente spring. Other hinge parts such as the pin and roller for the door detente and hinge pins and bushings are also available.
need to replace door hinge pin on 189 mitsibushi Triton tray back
You can replace the top door hinge with bottom hinges on the 1992 as long as the hinge is for the cab doors. The hinges for the tailgate would not work on the doors.
The price to replace these items can be anywhere from 20 dollars to 450 dollars. It depends on where you go to have it done and what they charge.
Your local auto parts store will sell you a simple tool to do just that. It should sell for under $10.
break off the bottom bushing that hold door pin pick up on the door slightly use a hammer and screw driver to drive pin out and replace
Open the door and hold it up with a jack under it. Have one or two helpers hold the door on the jack while you unbolt and replace the hinges one at a time. The helpers can shift the door for you as needed.
the door hinge pin i dont think can be replaced.the whole hinge has to be.ive had 3 chevys.a 1983,1985,and now i own a 1996 with the same prob,you should be able to get it in a boneyard or junkyard however you word it.shouldnt be much but they dont like to take part off of doors.or call a dealer.and no you dont and engine hoist to take the take of but mark it well so you can put the hinge back in the proper place
Replace all the door hinge pins and bushings. By doing so it will realign the door back to where it belongs.
how do you install spring on interior door handle of a 98 chevy pickup
jack the door up on the end of it and unbolt the hinge and replace with the new one.
you might need to replace the hinge pins.. or the complete hinge
You have to replace the whole hinge assembly, they don't make a hinge pin kit for the Thunderbird.
To fix a car door that is sprung due to a bent or damaged hinge, the best thing to do is replace the hinge. If the hinge is welded and not bolted to the vehicle, the entire door will have to be replaced.
dealer parts department?
THERE IS A CHANCE IF THE DOME LIGHT IS STAYING ON IT IS NOT THE THE DOOR SWITCH, BUT WORN DOOR HINGE BUSHINGS,
To replace the door hinge pins on a 1997 Jimmy you will need to open the door up. Place two jack stands on the front and back of the door's length at the bottom portion of the door for support. Remove the damaged hinge pin with the proper socket. Place the new hinge pin in place and secure it.
Ask questions, submit answers, leave comments
Earn points for using the site
Customize your profile
Already have an account? Log in