Replacing the head gasket on any vehicle is a long and complicated process, however if you wish to see basic step-by-step instructions go to the related question on the right side of the page "How do you replace a head gasket?"i have a 3.3 1994 grand voyager it cost 600 i did my self and put new head on it had for 5 year i go back forth from ks to nj allot i get 19 miles to gallon i love my van i got pic of my motor torn apart if you want to see the pics hit me at larryshin40324@Yahoo.com ill show my pic i had to put new lifters head gaskets pentum gasket also i take pics before i take apart just to make shore goes back right my van got a short in fan i cant find it
Replacing the head gasket on any vehicle is a long and complicated process, however if you wish to see basic step-by-step instructions go to the related question on the right side of the page "How do you replace a head gasket?"
Remove transmission oil pan for access to filter. Replace pan gasket, fluid and filter
Yes it does, sometimes called a bullring.
105 in-lbs.
Replacing the head gasket on any vehicle is a long and complicated process, however if you wish to see basic step-by-step instructions go to the related question on the right side of the page "How do you replace a head gasket?"
The oil pan of a 1998 Plymouth Voyager is quite easy to remove. Simply remove the series of bolts around the housing of the pan. Make sure to purchase a new gasket when replacing the pan.
replace head gasket
I think you might have a bad head gasket. Just a guess.
Follow the upper radiator hose to the engine... that is where its located inside the thermostat housing. Remove upper hose to the engine, then remove the 2 bolts holding the thermostat housing on, then remove thermostat, replace with new one plus gasket, put the housing back on, hose back on, refill with all fluids lost and your done. really simple.
Wouldn't say head gasket for the car would get so hot & stop you have a hose losing water
You can locate the thermostat on the front of the engine follow the upper radiator hose back to the engine - the thermostat is located in the engine housing that the hose connects to, there are usually 2 bolts that you need to remove, take of the housing that holds it in place, remove the gasket and clean, test the thermostat or put in a new one - to test the thermostat hold it over a boiling pot of water with tongs if the thermostat opens this is not your problem if it does not open then your thermostat is faulty. Replace and reseat thermostat, replace the gasket, replace the bolts and radiator hose.
No, you should never have to trim a head gasket. If the holes do not match up, you have the wrong gasket.No, you should never have to trim a head gasket. If the holes do not match up, you have the wrong gasket.