Auto Parts and Repairs
Chevy Silverado
Heater Cores and Blower Fans
Ford Bronco XLT

How do you replace a heater core on a 1993 Chevrolet Berreta GTZ 3.1L?

242526

Top Answer
User Avatar
Wiki User
Answered
2004-12-02 07:09:35
2004-12-02 07:09:35

The question you ask is too involved for a proper answer. You need to go to a car parts store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


To replace your heater core on a 1993 caprice, you will need a screwdriver, a socket wrench, and a weather seal adhesive.

It is in the air conditioner /heater case behind the glovebox.

The 1993 Ford F1 50 pickup truck heater core can be replaced by removing the water supply hoses. Remove the heater core retaining bolts. Reverse the process to replace the new heater core.

It's tough for an amateur. The heater core is inside behind the console.

You can find the heater core behind the kick plate in your 1993 Acura Legend. Remove the water hoses. Remove the heater core retaining bolts. Reverse the process to install the new heater core.

REPLACE THERMO STAT/CHECK TO REPLACE THERMO CENSOR!

Drain the water from your 1993 Chevy Lumina cooling system. Remove the water supply hoses to your heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.

specs on how to replace a heatercore on a 1993 ford explorer

Passenger side, near the firewall. It is not difficult to replace, it is just very difficult to get to.

your better off asking if its worth it its a lot

Sometimes you have to remove the pump to get to the fitting on the pump.

pry out the control switch and disconnect the electrical connectors.install is reverse.

it depends on the shop but it takes 6.3 hours

loosen the clamp holding the hose on to a fitting and pull the hose free.

Pull the glovebox and pull to the left and forward on the ECM...comes right out

the wire is bare how do you replace the wire with out removing the dashboard on a 1993 Chevrolet corsica?

you have to remove the dash and every thing attached to it. Is it the same for a 1988 Mazda 929?

Remove the inside door panel of your 1993 Chevrolet Lumina. Remove the passenger mirror wiring harness. Remove the passenger mirror retaining bolts. Reverse the process to install the new passenger mirror.

To remove the heater core you have to first rmove the bottom dash panels under where the heater controls are then pull the black box that is pu under the dash and the heater core is under there right where the hose comes through from your thermostate

how do you change the heater hoses on 1993 chey lumina 3.8 liter

you have to remove the dash to get to it, it would save alot of time and aggravation to have someone do it for you. sure it will cost, but trust me, it took me 2 days to replace mine

what is the blue book value for 1993 white Chevrolet suburban vehicle

There is an aftermarket kit from HeaterTreater that makes this job a breeze. Check out the product at heatertreater.net


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.