the power steering reservoir
get a sledge hammer and beat it to little pieces and pick them up and replace them with ones that r not broke. I need the answer myself.
how do replace a power steering hose on a Chevy c-1500 pickup truck
The 1997 Chevy Cavalier power steering hose is held in place with swivel nuts. Loosen the swivel nuts by turning them to the left. The power steering hose will come off. Reverse the process to install the new power steering hose.
Next to the power steering pump
a light greeny blue
ABOVE YOUR POWER STEERING RACK LOCATED ON THE FIREWALL
Remove the belt from your 1969 Chevy power steering pump. Remove the power steering pump hoses. Remove the power steering pump retaining bolts. Reverse the process to install your new power steering pump.
Rear P/S top of engine. A black cap with orange writing that says Power Steering.
You NEED to replace the rack and pinion steering unit.
you will need a power steering pulley puller other than that its gravy
its on the passerger side by the front wheel under the power steering.
Most times you simply replace the power steering pump. Good Luck
You should check the fluid level in the power steering pump.
its on the right side of the valve cover, near the power steering pump.
Check the recall on the problem with the power steering pinion shaft....maybe what u need instead recall #02v286000 (try motor trend.com or google it)
Remove the belt from your 1992 Chevy Lumina power steering pump. Remove the power steering pump hose. Remove the power steering pump retaining bolts. Reverse the process to install the new power steering pump.
go to your local machanic
Take it to the dealer. Trust me. It's a pain.
what about it?
Remove the plug on the bottom of the power steering fluid pump. Drain the power steering fluid out. Replace the plug to the bottom of the power steering pump. Replace the power steering fluid.
It's a real pain. If you have access to a hoist, the easiest way to do it is to disconnect the steering shaft and lower the rear of the sub-frame to get access to the fittings on the steering rack. Had to do this once because the loop in the line used as a cooler rusted out.
There is no standalone "power steering belt" on a 94 cavalier, just one long serpentine belt. There is a diagram in front of the motor on the passenger side right next to the prop rod. That diagram shows proper belt routing.