The driver side electric window switch on a 1992 Acura Integra is reached by removing the door panel. Unbolt the switch from the mounting bracket and disconnect the wiring from the harness. Replace the unit.
Acura Integra GS-R was created in 1992.
The cylinder firing order for the 1992 Acura Integra is: 1-3-4-2
Yes, the 1992 Acura Integra has a wiper relay on it. The relay is located under the underhood relay box.
When changing the corner lights on a 1992 Acura Integra first find the housings for the corner lights. Pull the old lights off and replace the bulbs.
Replacing a 1992 Acura Integra head gasket will cost approximately $500. The exact cost to replace the head gasket is dependent upon several different factors.
Remove the tire and wheel. Remove the and to the axle. Remove the wheel bearing seal, with a seal puller. Remove the wheel bearing. Reverse the process to install the new wheel bearing.
what slot do the left power set belt fuse go in the fuse box for 1992 acura integra Under the driver side dash
should be under the passenger floor
Unscrew the panel under the steering wheel, and you should see it bolted underneath. Really easy to replace.
The 1992 Acura Integra master window switch is interchangeable with other 1992 models. The master window switch was used in all 1991 through 1994 models.
http://www.partstrain.com/ShopByDepartment/Repair_Manual/ACURA/INTEGRA Google's your friend! Also try the newsgroup "alt.autos.acura". Knowledgeable crew there!!
Click on the link below for more information.
YES, all vehicles prior to 1995 were OBD1.
Where is the oil filtet located on a 92 honda
Replace the head gasket. Major repair that should only be done by a professional with the proper tools and skill.
You need to replace the shifter switch (parts and labor cost me $150) -- I finally just had this fixed on my 1992 Integra, and am very happy to be done with this annoyance!
they dont have day times....
HOW TO REPLACE A TIMING BELT ON A 1992 ACURA VIGOR? how do you change a timing belt on a 1992 acura vigor 2.5l how do you change a timing belt on a 1992 acura vigor 2.5l -------------------------------- See article at the Acura Vigor Club -- Related Links (below).
Usually a bottom end bearing problem mostly caused by lack of oil changes or high mileage on engine. You can try to replace the bearings but usually it's a temporary fix at best as there is probably crankshaft wear.
On the other end of the large top-left radiator hose.
you have to bring the V.I.N (vehicle identification number) to an acura dealership and they will give you the code there, every cars different