You should have a belt routing guide on the radiator support of the vehicle when you open the hood, somewhere around the hood latch. You will notice a spring tensioner pulley under the alternator, you can use a socket or a wrench to remove the belt, turn the tensioner clockwise to take the tension off the belt to remove the belt. You do not need to remove anything other than the belt. Can be removed with fan shroud in place. Notice the belt routing guide while reinstalling. To install route the belt as in belt routing diagram, the tensioner will be the last pulley to put the belt over.
Its a little easier to put the belt on the alternator last. Usually the wrench or socket gets in the way of trying to put the belt on the tensioner last.
Need to know what engine you have in order to answer this.
It should be either under the hood in the engine compartment or in your owners manual.
The Cummins engine in a Dodge truck does not have glow plugs.The Cummins engine in a Dodge truck does not have glow plugs.
How to remove and install the serpentine belt on 1991 Chevy Blazer with AC?
The 8.3L V10 Dodge Viper engine used in the SRT10 package.
A ram with a viper engine is an SRT8
what is the ign firing order for a 1994 dodge ram 1500 truck with a 360 engine in it
The guy that changed the pump on the 98 Chevy Truck helped me on my 97 Dakota.
Hemi is an engine and it's made by dodge
buying a dodge was your first mistake
The engine for a cement truck is a very large desiel engine. This engine will cost about 10 thousand dollars in order to replace.
The tension pulley should have a bolt that holds it on, allowing you to replace the unit.
serpentine belt for 97 7.4 454 Chevy truck
need diagram for 1994 chevy truck serpentine belt?
The Dodge Ram 2012 has the biggest engine. It is extremely powerful.
If it was behind the same kind of engine it probably will.
To replace the water pump in my 2001 Dodge Ram 1500 v8, it was $375 including labor and everything.
Depends on the engine. Should be on the flywheel.
If its a gas engine yes, if its a diesel no.
With some modification, yes
The engine computer is the regulator.
All timing gears. You have to disassemble the entire front of the truck and engine to access.
Do you have to remove the battery and battery holder?la
if the engine is stock it has 160 horsepower
The fluid level in an automatic transmission in a 1995 Dodge Truck should be checked at idle in Neutral with the engine at operating temperature.The fluid level in an automatic transmission in a 1995 Dodge Truck should be checked at idle in Neutral with the engine at operating temperature.