0
open the trunk and inside you should see the rear plastic panel of your lancer's tail lights. undo the screws(should be 3 screws/PC) using Philips screw driver and gently pull the assembly off. you should see 3 light bulbs. replace whichever is busted. make sure you install the correct bulbs for each socket.:)
on an 03 lancer there are 2 screws and they are on the outside of the car when you open the trunk. remove then pull out assembly and change bulbs.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How do you replace a tail light cover on a Mitsubishi lancer coupe?
well its easy look up your bum ya monkey!
What type of bulb to use on tail light of Mitsubishi lancer?
Phone your local Mitsubishi dealer
How do you replace a tail light bulb on a Mitsubishi lancer?
peel off carpeting behind the tail light from the trunk. there should be bulb holders- pull out the holder that holds the busted bulb. you can do this by slightly turning it and pulling it out. change the bulb and replace the holder the same way you removed it.
How do you replace the tail light bulb on a 2000 Mitsubishi Eclipse?
afshar13@yahoo.com
How do you replace a tail light on Mitsubishi Lancer stationwagan?
It will vary depending on year of vehicle which was not provided. Mitsubishi Lancer tail light bulb replacement: Purchase the correct replacement tail light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the tail light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
Replace tail light 2004 Mitsubishi endeavor?
Take 2 screws out and pull light straight back, it will come over, replace bulbs and put back on and replace screws
How do you replace the rear driver's side tail light assembly on a 2005 Mitsubishi Lancer?
When you open trunk there should be two screws attached to the tail light. Then remove trunk floor and spare tire cover, remove trim piece around trunk hook (should have pull out pins). Remove clips in carpet in front of tail light. Once everything is out pull back carpet, there will be two snaps that you will see, push them out and pull tail light(for the most part the tail light is pressure fitted.
How do you change tail light on 2004 Mitsubishi lancer es?
2004 Mitsubishi Lancer tail light bulb replacement: Purchase the correct replacement tail light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the tail light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
How do you replace the tail light cm?
you don't replace the tail light you just replace the bulb in it
How do you change the tail light bulb on a 2002 Mitsubishi Galant?
You open the trunk and remove the plastic wingnut screw on the backside of the tail light and replace the bulb and put the nut back on...very easily done without tools...
How do you replace a Toyota Highlander tail light?
On a 2012 toyota Highlander, How do you replace tail light Assembly
2002 Mitsubishi Galant where is the tail light fuse and relay?
The 2002 Mitsubishi Gallant tail light fuse is located in the first column of the fuse box. The tail light relay switch is also in the fuse box, at the top of the third column.
