0
How do you replace a thermostat on a 2006 Ford Mustang 4.6 liter engine?
Wiki User
∙ 14y ago
* Disconnect the negative battery cable * Drain the cooling system if the coolant is pretty new save it * Remove the air duct between the air cleaner housing and the throttle body * On V6 models follow the upper radiator hose to the engine to locate the thermostat housing .On V8 models the thermostat housing is located in between the engine and the cooling fan in front of the power steering pump * On V6 models remove the hose from the housing by loosening the hose clamp. Squeeze the ends of the clamp together with hose clamp pliers.If the radiator hose is stuck grasp it near the end with a pair of adjustable pliers and twist it to break the seal then pull it off if the hose is old or is deteriorated cut it off and install new one. * Remove the fastners and detach the thermostat housing cover.If the cover is stuck tap it lightly to jar it loose * Remove the O-ring seal and discard it * Note how the thermostat is installed and then remove the thermostat from the housing. * V8 models remove the fastners and detach the thermostat housing cover if stuck tap it lightly to jar it loose * Note how the thermostat is installed and then remove it.Remove and discard the old O-ring seal
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Where is the thermostat located on a 2001 Ford Mustang v6?
If you follow the top radiator hose from the radiator , it connects to a housing that is bolted to the front of the engine . The engine cooling thermostat is INSIDE the housing on your 2001 Ford Mustang , 3.8 liter V6 engine
How do you replace the thermostat located on a 1995 Buick Regal 3.8 liter?
depends on the engine size
How do you replace the thermostat on 2004 3.4 liter Chevy impala?
It is at the engine end of the top radiator hose.The housing is the thermostat housing and the thermostat is located therein.
Where is the thermostat on a 1995 Plymouth Voyager 2.5 liter engine?
Right at the engine head, where the top radiator hose meets it. That is the thermostat housing. Clean it real good when dismantling and replace the new thermostat with the spring facing the engine.
Changing thermostat on 2000 Chevrolet 4.8 liter engine?
Changing the thermostat on a 2002 Chevrolet 4.8 liter engine is simple to do. First, follow the upper radiator hose to the thermostat. Then drain the radiator hose. After the hose is drained, remove the clamps and bolts holding the thermostat housing in place. Then remove the old thermostat and replace with a new one.
What is the real horsepower of a 1988 mustang?
The horsepower on the 1988 Mustang was # 90 horsepower 2.3 liter engine # 225 horsepower 5.0 liter engine
What motor came in 96 mustangs?
In a 1996 Ford Mustang : The 3.8 liter V6 engine ( if you had a Mustang GT it was the 4.6 liter SOHC , V8 engine )
How much horsepower does a 1999 mustang have?
The 1999 Ford mustang was rated at 190 horsepower for the 3.8 liter engine and 260 horsepower for the 4.6 liter engine
Where is the thermostat located on a 1999 2.4 liter Grand Am?
The thermostat on a 1999 2,4 liter Grand Am is located on the side of the engine. The thermostat is on the drivers side of the engine a few inches from the top.Ê
What is the spark plug gap for a 1986 mustang with a 5.0 liter engine?
( .050 inch ) - spark plug gap for 1986 Ford Mustang - 5.0 liter engine
What size engine came in a 2001 mustang?
In a 2001 Ford Mustang : The 3.8 liter Over Head Valve , V6 engine ( and in the GT version , the 4.6 liter SOHC , V8 engine )
What are the engine sizes of a 2000 Mustang?
That has the 3.8 liter ( 232 cubic inch ) V6 engine ( unless it is a Mustang GT - that's a 4.6 liter ( 281 cubic inch ) V8 engine
