answersLogoWhite

Still Have Questions?

Related Questions

How do you replace a Honda Odyssey radiator?

To replace the radiator in a Honda Odyssey you have to drain the coolant out of the old one. Then you unscrew any fasteners and hoses and lift the old radiator out of the van. Place the new radiator into the vehicle, reattach hoses and screws, and refill with new coolant.


How do you replace rear window motor in Honda Odyssey?

The rear window motor on a Honda Odyssey is replaced by removing the cover screws, disconnecting the wiring harness, and unbolting the motor. A new motor can then be put in place and bolted in.


What is the cargo capacity of the 2004 Honda Odyssey with all seats in place?

The 2004 Honda Odyssey has 38.1 cu.ft. of cargo capacity with all of its seats in place.


What is the cargo capacity of the 2014 Honda Odyssey with all seats in place?

The 2014 Honda Odyssey has 38.4 cu.ft. of cargo capacity with all of its seats in place.


What is the cargo capacity of the 2013 Honda Odyssey with all seats in place?

The 2013 Honda Odyssey has 38.4 cu.ft. of cargo capacity with all of its seats in place.


What is the cargo capacity of the 2009 Honda Odyssey with all seats in place?

The 2009 Honda Odyssey has 38.4 cu.ft. of cargo capacity with all of its seats in place.


What is the cargo capacity of the 2002 Honda Odyssey with all seats in place?

The 2002 Honda Odyssey has 38.1 cu.ft. of cargo capacity with all of its seats in place.


What is the cargo capacity of the 2006 Honda Odyssey with all seats in place?

The 2006 Honda Odyssey has 38.4 cu.ft. of cargo capacity with all of its seats in place.


What is the cargo capacity of the 2005 Honda Odyssey with all seats in place?

The 2005 Honda Odyssey has 38.4 cu.ft. of cargo capacity with all of its seats in place.


What is the cargo capacity of the 2007 Honda Odyssey with all seats in place?

The 2007 Honda Odyssey has 38.4 cu.ft. of cargo capacity with all of its seats in place.


What is the cargo capacity of the 2008 Honda Odyssey with all seats in place?

The 2008 Honda Odyssey has 38.4 cu.ft. of cargo capacity with all of its seats in place.


What is the cargo capacity of the 2003 Honda Odyssey with all seats in place?

The 2003 Honda Odyssey has 38.1 cu.ft. of cargo capacity with all of its seats in place.


What is the cargo capacity of the 2010 Honda Odyssey with all seats in place?

The 2010 Honda Odyssey has 38.4 cu.ft. of cargo capacity with all of its seats in place.


What is the cargo capacity of the 2011 Honda Odyssey with all seats in place?

The 2011 Honda Odyssey has 38.4 cu.ft. of cargo capacity with all of its seats in place.


What is the cargo capacity of the 2012 Honda Odyssey with all seats in place?

The 2012 Honda Odyssey has 38.4 cu.ft. of cargo capacity with all of its seats in place.


How do you replace oxygen sensor in Honda civic?

The oxygen sensor on a Honda Civic is replaced by disconnecting the wiring harness and removing the sensor using a socket wrench. Anti-seize paste is applied to the threads, a new sensor is torqued into place, and the wires reconnected.


Your 2002 Honda Odyssey D drive light no longer works?

just place the bulb


How do you replace the camshaft sensor on a 1996 Suzuki Sidekick Sport?

Locate the camshaft sensor in your car. Disconnect the electrical plug on the sensor. Remove the bolt that holds it in place. Twist the the sensor to remove it and place in the new one.


Are the screws on the rotor necessary on 2004 Honda Odyssey?

no it's not necessary. you can take it off. that's only holding the rotor in place.


How to Replacing oil pressure sensor 92 Honda Accord?

The oil pressure sensor on a 92 Honda Accord is replaced by disconnecting the wiring harness and unscrewing it using a wrench or socket set. The replacement sensor is then put into place and torqued back to specs.


Where is o2 sensor prelude?

The O2 sensor on a Honda Prelude is found on the exhaust pipes of the vehicle. They are located near the catalytic converter which is place on the underside of the chassis.


Honda odyssey directions for change head light bulb 2002?

changing a head light bulb in an odyssey is real easy. first remove connector from back of bulb. then remove rubber cover by pulling on one of the tabs. then remove retaining clip which holds bulb in place. remove old bulb, replace with new bulb, replace retaining clip, then replace rubber cover, and reconnect connector. all done. each light takes about 2- 5 minutes


How do you replace the crankshaft positioning sensor on a 1989 ford sho Taurus?

To replace the crankshaft positioning sensor on a 1989 Ford Sho Taurus, go near the water pump at the front of the car and remove components that block access to the sensor. Remove the two bolts holding the sensor in place remove the wire that sends data. Finally, replace the crankshaft positioning sensor.


How do you replace Honda Civic dx back window?

To replace the back window on a Honda Civic DX, you will have to remove the old one, peel off the remaining plastic, and put the new one in place.


How do you replace a speed sensor on a 1995 f-250?

speed sensor is located on the rear side and top of differential it is held in place with one bolt disconnect electric pigtail remove bolt, pull sensor out insert new sensor replace bolt reconnect pigtail