There should be 2 screws/bolts around the pull handle. Usually a 7mm. Take those out and then a Phillips screwdriver and remove the screw on the panel around your inside door handle. Remove that small panel.If its a crank window you'll need a special tool or a small screwdriver to remove the C clip. Once all the screws are out take a sturdy putty knife or something similar and starting at the bottom, gently pry out. There are maybe 10-12 push type clips that hold the panel on. After that you'll see the holes that hold the mirror on. (3). These are usually a 10mm. Good luck.
Everyone should have a manual, and the library should have a professional shop manual available for copies in the reference section (FOR FREE)...read up and fix 'em like the pro's...! :)
Dave
Remove inside door panel, remove mirror assembly holding bolts, unplug electrical connection and reinstall.
The side view mirror on a 1995 Chevy Corsica is mounted by screws. Remove the screws and panel for the mirror on the inside of the vehicle. Pull and replace the unit.
check your answer
== ==
== ==
Use strong glue to attach mirror
How do you replace a break light switch on 1995 Chevy Tahoe
== ==
how do you replace the drivers window clips on the glass od a 1995 grand prix se 2 door?
replace a windshield wiper switch on a 1995 chevy lumina van
Remove the door panel and the mirror is held on with bolts.
gerflerbergab