The job will be much easier with the car on a hoist. The coolant has to be drained, and even then, there is always still some left in the block. The old plug has to be removed, the hole cleaned, a sealant applied and the new plug has to be punched in, carefully as not to knock it in too far.
how to replace shifter tube
In order to replace the oil pan on the Crown Victoria you have to remove the engine from the car. After the motor has been removed then you remove the bolts holding on the oil pan and it can be replaced.
Yes, they are identical
For a 1991 Ford Crown Victoria : " regular " unleaded , 87 octane
In the gas tank.
4
The dash has to be removed to gain access to the heater box. The heater box then comes out and is split open to replace the core.
Yes, both model years are AOD transmissions.
According to my Chilton's book : For a 1991 Ford Crown Victoria ( 5.0 / 302 and 5.8 / 351 ) With engine oil filter change ( 5.0 U.S. quarts )
Drain the coolant, remove the glove box and base to the dash. youll find the heater core on the passanger side.
10 degrees advance
Often in the owners manual is where i found the one for my 1991 Crown vic. Hope you have your manual?