how do i find out if i have ABS on my front wheel bearing , on my 2000 dodge Dakota quad cab 2 wheel drive
1990 dodge dakota 5 speed manual 2 wheel drive 4 cylider
It is either rear wheel drive or 4wd.
Check the CAD, the diaphragm may be toast. just replace.
The Dodge Dakota pickup truck has CV joints on both front wheels. The pickup truck also has a driveshaft, as it is rear wheel drive.
Rear wheel drive or four wheel drive.
Yes it will as long as the ECU is from the same drive train (E.g. 4x4, 4x2 automatic, manual.)
yes they will i own both if there both 5 lug
4 wheel drive - 6 lugs 2 wheel drive - 5 lugs
Remove wheel, brake caliper, brake disc, parking brake shoes etc. Drive out broken stud, replace with new stud. Replace above in reverse order.
If you are wondering whether it is possible to replace one's own brake rotors or not because you drive an older vehicle that need brake rotors replaced, then the answer is no.
The bolt pattern for Dodge Dakota wheels is 6 on 4.5inches (114.3mm) for 4x4 models and 5 on 4.5 inch for older two wheel drive models.
Not with the rear wheels on the ground.
Under the hood, pasenger side firewall.
They are a sealed bearing and are not "packable".
Put on a roll back tow truck and drive away.
Check for vacuum leaks.
at least 150-200
If you are following the proper procedures then the fluid will come out. Have someone pump and hold the brake pedal down, open the bleed screw on the caliper, pressure will force the fluid and air out.
Lower left side of engine.