0
The fuse box is located inside the car on the driver's side, below the dashboard, just inside the door. If this isn't clear, think of where you reach for the hood release. The fusebox is in that area, but closer to the door. It is a vertical, narrow rectangular panel with a latch or release at the bottom. Just turn the release to the right and the panel can be easily removed. The inside of the panel has a list that identifies each fuse.
What else can I help you with?
How do you replace an ignition switch in a 1991 Volvo SE Turbo Wagon?
replace ign sw on 1991 volvo 240
Volvo 240 fuse?
Yes the 240 does have fuses. Was that your ?.
How do you reset engine Light on 1991 Volvo 240 DL?
how do you reset engine light on 1991 volvo 240
Would a 1987 Volvo 240 hatch fit a 1991 Volvo 240?
long answer: yes
How do you fix the horn on a 1991 Volvo 240 Fuses are OK?
Check for corroded wiring near the horns or along the quarter panel in the driver side.
Will a 1988 glove box for Volvo 240 sedan replace a 1989 glove box for Volvo 240 sedan?
YES
Can you replace the taillight lens of a 1990 Volvo 240 with one from a 1984 Volvo 240?
If they're identical, yes. Try it and find out.
What type of brake fluid is in a 1991 Volvo 240?
DoT 4
Is the EGR valve expensive or difficult to replace on a 1987 Volvo 240 DL?
It can be a little expensive to replace the EGR valve on the 1987 Volvo 240 DL. The job takes about 1 to 3 hours and can cost as much as about 240 dollars.
Volvo 240 1991 - What is the name of the piece the headlight bulb plugs into and how do you replace it?
The style of plug is a 9004. I just replaced one in my 91 Volvo 240. The connector was about 5 bucks at the parts store. Make sure you splice the red black and blue wires in correctly!
How do you replace the oxygen 02 sensor in a 1991 Volvo 240?
the 02 senser is on the manifold by the firewall on the passenger side under the hood [ behind and undr the spark plugs]
How do I replace the license plate light on 1991 Volvo 240?
To replace the license plate light on a 1991 Volvo 240, first, locate the light assembly, which is typically found above the license plate. Use a flathead screwdriver to gently pry off the plastic cover or lens. Once exposed, remove the old bulb by twisting it counterclockwise and replace it with a new one, ensuring it’s securely in place. Finally, reattach the cover and check that the light is functioning properly.
