answersLogoWhite
Chevy Astro
Chrysler Town and Country
Ford Expedition XLT

How do you replace headlamp bulb on 1997 astro van?


Top Answer
User Avatar
Wiki User
Answered 2007-03-25 00:32:46

Lift the hood and look on the top of outside part of the plastic headlight assembly. Take out the hex head screw with a 10 mm socket. The fake plastic light assemby outside of the headlight will now come off. Take out the hex head screw behind this assembly and the two hex head nuts connecting the the upper side of the headlight assembly to the body. The whole headlight assembly will now come out. Unplug the sockets. You will need a small torx screwdrive to remove the screws holding the lamp assembly. Twist the socket and it will come out. Give your local autoparts store $10 for a new bulb and socket.

001
๐ŸŒŽ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Your Answer

Loading...

Still Have Questions?

Related Questions

How do you replace headlamp bulb on Chevy Astro van?

remove the plastic cover where the light is, then remove the 4 screws that hold the the thin metal frame that holds it in place. pull the bulb out, unplug it and then reverse the process


How do you replace headlamp bulb on an Audi a6 2008 model?

with your hands ?


How do you replace the headlamp bulb in a Mercedes A140?

ask someone else to do it


How do you replace a headlamp bulb on a 2006 dodge charger?

1/4 turn to release the old bulb.


How do you replace 05 accord headlamp bulb?

very carefully very carefully


How Replace xenon headlamp bulb Mercedes E320?

Carefully! there very expensive.


How do you replace Hyundai i20 headlamp bulb?

Don't look on this site anyway


How do you remove headlamp to replace bulb in 2001 town and country Chrysler?

Open the hood. There are three hex head bolts that hold each headlamp to the van. Remove each bolt and gently pull headlamp out from grill using the small handle-like grip. The headlamp will remain connected to the van with the lightbulb socket. Twist the collar away from the bulb then pull the bulb assembly out of the headlamp. Replace bulbs and reassemble components.


Headlamp bulb isn't bright?

Replace the battery and recharge if a rechargable battery if not it might need new bulb


How do you replace headlamp bulb and parking bulb located in the same housing on a 2004 VW Passat?

go to halfords


How replace headlamps on Pontiac Sunfire 1995?

Remove the air intake splash shield from the vehicle. Remove the 2 headlamp retaining bolts. Remove the lamp assembly from the front of the vehicle. Detach the headlamp connector. Remove the headlamp bulb retaining ring. Remove the headlamp bulb from the headlamp.


How do you replace the headlight bulb located on a 1998 Nissan Maxima?

Open the hood and find the electrical lead into the headlamp: that plugs directly into the bulb, which is screwed into the headlamp. You just need to remove the plastic shield over the back of the headlamp to gain access, unplug the electrical lead, and unscrew the bulb. Replace the bulb, reattach the lead, and reinstall the shield. A 10-minute job!


How to Changing headlight bulb 2005 ford f 250?

Removal WARNING: The halogen bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped. Handle the bulb only by its base. Avoid touching the glass envelope. NOTE: The headlamp bulb should not be removed from the headlamp until just before a new bulb is installed. Removing the bulb for an extended period of time may effect headlamp bulb performance. Contaminants may enter the headlamp where they can settle on the lens and reflector. Never turn on the headlamp with the bulb removed from the headlamp. # NOTE: Make sure that the headlamp switch and the ignition switch are in the OFF position. Disconnect the headlamp connector. # Remove the headlamp bulb. ## Rotate the headlamp bulb retainer counterclockwise one-eighth turn and remove. ## Remove the headlamp bulb.Installation CAUTION: Bulbs 9004 and 9007 look similar, but are not interchangeable. # Install the headlamp bulb. ## Install the headlamp bulb. ## Rotate the headlamp bulb retainer clockwise one-eighth turn.# Connect the headlamp connector.


How do you replace the headlight bulb on a 2001 Pontiac Grand Prix?

See posting for "How do you change the headlamp bulb in a 2003 Grand Prix?" All these model years are similar in production for the headlamp assembly.


Can you replace a 60-55w headlamp bulb with 100w bulb without wiring changes?

You Should not. Danger of overheating bulb and wire melting


How do you replace headlamp bulb on Mitsubishi l300 panel van?

how do you replace head light blubs l300 panel van


How do you remove the Headlamp Bulb from a 92 Acura Integra RS?

if u cant replace a bulb the u should bring it to a garage .........


How do you remove headlight assembly on a 2000 Ford F-250?

Removal WARNING: The halogen bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped. Handle the bulb only by its base. Avoid touching the glass envelope. NOTE: The headlamp bulb should not be removed from the headlamp until just before a new bulb is installed. Removing the bulb for an extended period of time may effect headlamp bulb performance. Contaminants may enter the headlamp where they can settle on the lens and reflector. Never turn on the headlamp with the bulb removed from the headlamp. # NOTE: Make sure that the headlamp switch and the ignition switch are in the OFF position. Disconnect the headlamp connector. # Remove the headlamp bulb. ## Rotate the headlamp bulb retainer counterclockwise one-eighth turn and remove. ## Remove the headlamp bulb.Installation CAUTION: Bulbs 9004 and 9007 look similar, but are not interchangeable. # Install the headlamp bulb. ## Install the headlamp bulb. ## Rotate the headlamp bulb retainer clockwise one-eighth turn.# Connect the headlamp connector.


How do you replace headlight bulb in 2001 Porsche boxster?

http://www.bombaydigital.com/boxster/projects/headlamp/


How do you replace a headlight bulb on an F150?

***CAUTION***The halogen bulb contains gas under pressure. The bulb may shatter if the gas envelope is scratched or if the bulb is dropped. Handle the bulb carefully. Grasp the bulb only by its base. Avoid touching the glass envelope. è The headlamp bulb should not be removed from the headlamp until just before a replacement bulb is installed. Removing the bulb for an extended period of time may affect headlamp bulb performance. Contaminants may enter the headlamp where they can settle on the lens and reflector. Never turn on the headlamps with the bulb removed from the headlamp. Headlights Removal & Installation 1. Raise and support the hood. 2. Raise the headlamp retainers by pushing rearward and pulling up. 3. If equipped, rotate the headlamp bulb protective counterclockwise and remove. 4. Disconnect the headlamp bulb electrical connector. 5. Remove the headlamp assembly. 6. Rotate headlamp bulb retainer counterclockwise and remove. 7. Remove the headlamp bulb by pulling it straight out with a gentle up-and-down rocking motion. ***WARNING*** Do not touch the glass bulb with your fingers. Oil from your fingers can severely shorten the life of the bulb. If necessary, wipe off any dirt or oil from the bulb with rubbing alcohol before completing installation. To Install; 8. Install a new bulb into the headlamp assembly. 9. Install the headlamp bulb retainer and turn it clockwise to engage the retaining tabs. 10. Attach the bulb electrical connector. 11. If equipped, install the headlamp bulb protective cover. 12. Install the headlamp assembly. è Be sure the headlamp assembly is positioned correctly with the alignment pins inserted into the proper holes and onto the ribs of the reinforcement. 13. Engage the retainers by gently pushing down. 14. Turn the lights on and check the bulb operation.


How do you remove the bracket to replace a headlight bulb on a Saab 93?

2004 Saab 9-3Headlamp bulb replacement.There is a retaining bracket between the old bulb and the plugThe bracket retains the bulb in the headlamp housing.There are two clips that hold the retaining bracket in place.Be Careful not to break the clips and release the bulb.These bulbs are stubborn so be firm.Replace the bulb and retainer. The twist the assembly on the headlamp housing.Not the best design I've ever seen so be carefulMarcos


How do you replace the headlamp on a Honda metropolitan?

to remove the bulb simply take the four screws that attach the front assembly and it will give you access to the bulb.


How do you replace headlights on 2002 Ford F150?

***CAUTION*** The halogen bulb contains gas under pressure. The bulb may shatter if the gas envelope is scratched or if the bulb is dropped. Handle the bulb carefully. Grasp the bulb only by its base. Avoid touching the glass envelope. è The headlamp bulb should not be removed from the headlamp until just before a replacement bulb is installed. Removing the bulb for an extended period of time may affect headlamp bulb performance. Contaminants may enter the headlamp where they can settle on the lens and reflector. Never turn on the headlamps with the bulb removed from the headlamp. Headlights Removal & Installation 1. Raise and support the hood. 2. Raise the headlamp retainers by pushing rearward and pulling up. 3. If equipped, rotate the headlamp bulb protective counterclockwise and remove. 4. Disconnect the headlamp bulb electrical connector. 5. Remove the headlamp assembly. 6. Rotate headlamp bulb retainer counterclockwise and remove. 7. Remove the headlamp bulb by pulling it straight out with a gentle up-and-down rocking motion. ***WARNING*** Do not touch the glass bulb with your fingers. Oil from your fingers can severely shorten the life of the bulb. If necessary, wipe off any dirt or oil from the bulb with rubbing alcohol before completing installation. To Install; 8. Install a new bulb into the headlamp assembly. 9. Install the headlamp bulb retainer and turn it clockwise to engage the retaining tabs. 10. Attach the bulb electrical connector. 11. If equipped, install the headlamp bulb protective cover. 12. Install the headlamp assembly. è Be sure the headlamp assembly is positioned correctly with the alignment pins inserted into the proper holes and onto the ribs of the reinforcement. 13. Engage the retainers by gently pushing down. Turn the lights on and check the bulb operation.


How do you replace a headlight bulb in a Jeep Cherokee Sport 2001?

1997-2001, remove the 2 screws holding the plastic headlight bezel. Remove the bezel. Located the 4 screws on the metal frame holding the headlamp in the headlamp bucket. Remove them and the headlamp will be loose. Unplug the wire harness. Reassemble all of the above.


How do you replace the headlight assembly on a 2000 Dodge Caravan?

Open hood, remove headlamp bulb from headlamp assembly, remove (1) 10mm bolt from top of headlamp assembly, next remove (3) 10mm bolts from behind headlamp assembly, pull headlamp forward ( you may have to pry gently from the right side). Remove turn signal bulb-Done!