Chrysler Fifth Avenue

How do you replace parts on 1988 Chrysler 5th Ave after putting on a new water pump?

383940

Top Answer
User Avatar
Wiki User
2013-04-26 10:45:19
2013-04-26 10:45:19

Just reverse order of removal.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

Need to rePlace the water pump on a Chrysler mini van 3.3

User Avatar

where can I find a diragrame that shows how to replace a water pump on a 2006 Chrysler town country tour van

User Avatar

Not real hard but you need direction. Get a manual on your car from the parts store or from AUTOBOOKSONLINE.COM. It will cost about $20

User Avatar

The water pump is located behind the timing belt cover. It is driven by the timing belt. If you decide to replace it, replace the belt and idler pullys at the same time.

User Avatar

it took me an hour to replace them. paid $60 for both items at advance auto parts. borrow the serpentine belt tool from advance auto so you can easily remove the belt. I was given an estimate of $160 including parts.

User Avatar

The thermostat housing on a Chrysler 302.7 L engine can be removed by loosening the 3 housing bolts. Remove the water hose and the housing will come off. Reverse the process to replace with a new housing.

User Avatar

No, but it is recommended. If the belt breaks, valves can get bent.

User Avatar

At least 5 hours. It is driven by the timing belt.

User Avatar

You do not need to replace a water pump and thermostat at the same time. These parts do not ruin each other.

User Avatar

Look through your users manual to get started. This will explain the parts that are needed and how to install the new parts.

User Avatar

the water pump is locate in back of the motor bracket on the left side of the engine it take about 4 hours to remove it

User Avatar

To replace a water pump on a Nissan Primera one must obtain the proper parts, the proper tools, and the instructions made to fit the model of the machine.

User Avatar

It is within the water outlet which is at the bottom of the top radiator hose. Mark

User Avatar

Chrysler V6, six to eight hours. Mercedes/Dodge Sprinter, two to three hours.

User Avatar

It has a timing belt, and the water pump is driven by the same belt. Replace the water pump at the same time you replace the belt. This is an interference engine and as such if the belt breaks serious engine damage will occur. Replace the belt and pump at 102,000 miles.

User Avatar

By putting two parts hydrogen and one part oxygen together with sufficient energy.

User Avatar

by putting the crown in water and putting a real gold ring in water and seeing the difference by putting the crown in water and putting a real gold ring in water and seeing the difference

User Avatar

Replace it with a new one from your local auto parts store.

User Avatar

An experienced mechanic can replace it in about 3 hours with the proper tools.

User Avatar

Take your old water pump out. Take it down to your local parts store Get a new water pump and then put it in.

User Avatar

Around $450 (parts included) in Toyota dealership


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.