Remove the transmission unbolt the flywheel and replace.
97 f250 5.8 i put a gooyear 6 groove 945
i think u unbolt the trans and the fly wheel reconect the trans
YES you do. It's all in the bell housing. No other way to get to it.
You have warped the brake rotors. Driving fast & hard stopping or riding the brake will cause this when the rotor is hot and you are stopped with heavy pressure on the brake pedal. Replace rotors and pads.
what kind of transmission s in my 97 gmc jimmy 4x4?
How do you replace an alternor on a 97 pathfinder
Yes it's the samething.
8 x 6.5" - pre '97 8 x 170mm - '97 on
reprogramed at dealer with ford IDS or WDS software
Try this link. Good info. and pictures. http://www.explorerforum.com/forums/showthread.php?p=1183804
No, the fuel pump is in the tank, just remove the fuel tank.
Yes I am looking for parts for my 97 jeep
Remove the two slider/anchor pins using a 3/8" Allen wrench and the caliper will come off.
4x4 fuse location on a 97 dodge pickup
Adjust carb on 400 Polaris 4x4 2stroke
How do I replace thermostat on 97 Ford van
how to replace 97 Lexus ES300 transmission
window washer pump is broken pump is in bottom of fluid bottle under hood pump is cheap to buy and easy to replace
Could be a 4.6, 5.4, 5.8, 7.3 or a 7.5
where is it leaking from?
your brake rotors are warped. You should repalce you brake pads and have the rotors resurfaced if possible, or replaced.
No there not press on. They are Flowting Rotors. You will need a 3 jaw gear puller to be able to remove them easy.
i had two codes which were neutral safety switch an tcm i heard the switch is the problem so replace it started it up lites went off for 10 min then came on again but the jeep runs fine it a 97 jeep country 4x4 4.0 i dont want to replace tcm there a lot of cash i dont have what should i do an thanks
no i did not replace head light switch