the library has chilton repair manuals,i just copy the page,pages that i need for .10 cents a copy
Where is starter on a 4 cylinder mazda 626?
I have 182 k on my 1996 4-cylinder Mazda 626
How do I replace ignition wires on my 98 Mazda 626 2.0L
A 2001 Mazda 626 V6 - 4.2 quarts A 2001 Mazda 626 4 cylinder - 3.7 quarts
You are extremely fortunate. The 4 cylinder & V6 on the 2000 Mazda 626 are NOT interference engines. There should be no damage.You are extremely fortunate. The 4 cylinder & V6 on the 2000 Mazda 626 are NOT interference engines. There should be no damage.
The clutch slave cylinder on a 91 Mazda 626 DX is located on the clutch bell housing. To replace the unit, first remove the hydraulic line and turn the line cap counterclockwise. Remove the two bolts holding the slave cylinder in place. Reverse directions to install new unit.
On the 2002 Mazda 626 , 2.0 liter 4 cylinder and 2.5 liter V6 engines ( 105,000 miles ) according to the Gates website ( they make timing belts etc. )
Kindly check your user manual to see a detailed instruction on how to set the timing on a twin cam Mazda 626 four cylinder.
The 1998 Mazda 626 low pressure port for your air conditioning system will be on the top of the air conditioner compressor. The low pressure port will be on the left-hand side of the compressor.
"http://wiki.answers.com/Q/What_transmision_years_will_fit_99_mazda_626_4-cylinder"
The brake fluid reservoir on a 1989 Mazda 626 is on the master cylinder. This is located in the engine compartment on the drivers side.
The reservoir is located on the master cylinder in a Mazda 626. To add fluid, simply remove the reservoir cap and pour fluid in.
The fuel filter on a 1999 Mazda 626 LX 4-cylinder is located in the rear of the vehicle. It is in the fuel line in front of the gas tank.
How can one replace a cornering light on 1990 Mazda dx
You can adjust the camshaft on your 1997 Mazda 626 with the camshaft adjustment bolts. You can access the camshaft adjustment bolts by removing the cylinder heads.
This vehicle does not have a cabin filter. There is nothing to replace.
In a 1994 Mazda 626 : Both the 2.0 litre four cylinder engine and the 2.5 litre V6 engine have a timing BELT
Mazda 626 frm 1996 doesn't have O2 sensors, have you ECU/PCM inspected, it might have a minor damage.
It is located under the trottle body. Milt
will fit 1998 and 1999 models only.
will a 1997 Mazda 626 transmission or engine interchange with a 1999-2002 Mazda 626 transmission or engine
Get a manual on your car from AUTOBOOKSONLINE.COM.
go to your local autozone.
it is the same for all Mazda with a v6
Where is the fuel injector located on a 1999 mazda 626v6