answersLogoWhite

0


Best Answer

I found this on another site. I will try it myself tomorrow.

"Thanks for the reply. I got it off by removing the window washer resevior, disconected the wiper transmission and removed the pully bracket and left brace. What fun it will be getting the new one in. All that for an alt. Vans are a pain "

User Avatar

Wiki User

8y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

18y ago

DISCONNECT THE BATTERY TERMINALS!!! The mounting blots that go through the alternator need to be removed (some are star bits) and then remove the two electrical connections, one a clip-on one a bolt-on grounding wire. Be careful NOT to get shocked or short out your new alternator, the battery terminals must be disconnected.

This answer is:
User Avatar

User Avatar

Wiki User

17y ago

You should get a book at an auto parts store that will tell you how and what to do, but generally remove the wires and loosen the bolts to take out the belt tension and remove. Also generally auto parts stores can test it to make sure its bad and you don't spend money where you don't need to.

This answer is:
User Avatar

User Avatar

Wiki User

11y ago

1. Disconnect battery 2. To create more room remove top of fan shroud by unscrewing the 8 10mm bolts along the top an sides

3. Disconnect plug at top of the altenator

4. Using a T40 torx head driver unscrew the bolt at the top left of the alternator bracket

5. Using a T50 torx head driver unscrew the bolt at the bottom right of the alternator bracket

6. To create more room at the back of the alternator remove air cleaner assembly

7. Using a 10mm socket unscrew the bolt at the rear of the alternator. The alternator should not come free from the bracket.

8. Using a 10mm socket unfasten the nut that is holding down the power wire on the back of the alternator

9. Put new alternator back in by reversing these steps.

This answer is:
User Avatar

User Avatar

Wiki User

9y ago

Remove the belt from your 1993 Cadillac Deville alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install your new alternator.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you change an alternator in 1991 caprice?
Write your answer...
Submit
Still have questions?
magnify glass
imp