It is the same as My 1995 Grand am. you take the belt off the alternator and then unbolt it after it is unbolted remove it and then un plug the back of it that is all there is to it.
Listen people. I keep seeing answers to question like the one here i am commenting on. " UNBOLT THE ALTERNATOR " is not an answer! --- The person asking the question already knows that. If you can't answer a question with an Educated answer -DONT- !!! When someone ask " How do I change the spark plugs on a Pontiac 2.4L" THE WRONG IS " use a Wrench and take them out" See where im going here. IF YOU DONT KNOW THE FACTS. DONT POST ANWSERS !!!
1996 2.4L Pontiac Grand AmWhat year, engine, model?
The door handle of a 1996 Pontiac Grand Prix can be replace because broken units will can not be fixed. To replace a handle remove the unit from the door and unhinged the locking mechanism.
under the throttle body.
how to replace alternator on Toyota 4 runner 1996
i have a probleme whit my 1996 grand am i cant change the plug cause there a bar on front of it
Have the alternator checked. It happened to me, and I had to replace it.
yes it will pontiacs are interchangable from the years 1993-1996
you need to remove the top engine mount
where is the fuel filter on 1996 Pontiac grand am and how to fix it.
Probably your alternator.
How do you replace a 1996 Grand Prix front bumper?
how do i change it
when should the vapor canister be replace on a 1996 pontiac sunfire
Is the engine a 3.1? If so it is easist to remove the crossover pipe, then the thermostat housing.
impossible i did and i had to drop the hole motor out of my car and so yah...
The 1996 Pontiac Grand Prix OBD 2 port is on lower edge of dash; right of steering column
does my 1996 pontiac ga stall out in park
If it the 3.8........start by disconnecting the battery. Then remove the sepertine belt. On the back of the alternator, there is a red cable and a plug. Undo those. Then there is only 3 bolts. Two in the front, one on the back.
The oxygen sensor on a 1996 Pontiac Grand Am is found near the catalytic converter. It will be place on the piping which leads to the catalytic converter.