0
Book Says: 1 Detach the cable from the negative terminal of the battery. If vehicle is equipped with Delco audio system make sure you have activation code prior to disconnect. 2 Clearly label then unplug and unbolt the electrical connectors from the alternator. 3 Remove drivebelt. 4. Remove alternator mounting bolts and the alternator. 5 Installation is reverse of removal.
Add your answer:
Earn +20 pts
How do you replace the alternator on a 1999 Pontiac Grand Am?
Take it to Mechanic!
Need to know how to replace a master cylinder with abs brakes on a Pontiac grand am?
my husband is trying to replace the master cylinder on a 1994 grand am. he was wondering on how to align the gears for the abs.
How do you replace the ignition in a 2001 Pontiac Grand Am?
ignition what? coil, swicth,module, lock cylinder? gm Jim
How do you replace the water pump on a 1994 Pontiac Grand Am 4 cylinder?
the library should have a shop manual for this vehicle :)
How do you replace starter on 2.3cy 1991 Pontiac grand am?
How do you replace starter on2.3 cy 1991 pontiac grand am
How do you replace the fan belt on a 1996 Pontiac Grand Am SE 4 cylinder?
you need to remove the top engine mount
How do you replace valve lifters on a Pontiac Grand Am?
how to replace lifters on a 03 grand am
How do you replace the water pump on a 2000 Pontiac Grand Am 2.4L?
how do I replace water pump 2000 Pontiac Grand AM SE1?
How do you replace the alternator on a 1998 Dodge Grand Caravan 6 cylinder 3.3 liter?
You can begin by removing the wiring harness from the back of your 1998 Dodge Grand Caravan alternator. Remove the alternator belt. Remove the retaining nuts. Reverse the process to install your new alternator.
Where is the alternator located on a 2002 Pontiac Grand Am?
There is none on GM cars
Where is the starter on a 1998 Grand Am?
Where is the starter on a 1998 Pontiac Grand Am, 6 cylinder
How do you replace alternator located on a 1999 Pontiac grand am se?
alternator on a 2000 Pontiac runs off a serpentine belt if its loose then chances are ur serpentine belt is worn or stretched or your tensioner pulley is bad or the tensioner itself..alternator bolts stable does not move like the old setup.
