Isuzu Rodeo
Ford Expedition XLT
Ford Explorer Eddie Bauer

How do you replace the blower motor in a 1995 Izusu Rodeo?

313233

Top Answer
User Avatar
Wiki User
2015-07-15 20:04:40
2015-07-15 20:04:40

remove the glove compartment you'll see it.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

Held in by two screws in a housing just to the left of the blower motor housing.

User Avatar

at is the cost to replace a blower motor on a ford focus

User Avatar

Check to see if you are getting power to blower motor - if so replace blower motor If not check fuse, switch, resistor pack.

User Avatar

How do you replace the blower motor on a 1994 chevy lumina euro?

User Avatar

Remove the blower motor retaining nuts. Remove the wiring harness from the back of the blower motor. Remove the fan from the blower motor. Reverse the process to install the new blower motor.

User Avatar

Behind the glove box or compartment.

User Avatar

How do you take out a blower motor on a vauxhallvectra vectra

User Avatar

To replace a blower motor in a 2006 Chevrolet Colorado first remove the old blower motor. Then install the new motor making sure to connect all the wires.

User Avatar

The blower motor is drawing to many amps, replace the blower motor.

User Avatar

The fuse. The blower motor speed resistor. The blower motor relay. The blower motor switch. Check for power at the blower motor connection.

User Avatar

Remove the wiring harness from the back of the blower motor. Remove the blower motor retaining screws. Remove the fan from the blower motor. Reverse the process to install the new blower motor.

User Avatar

The bearings are out of it. Replace Blower motor.

User Avatar

Remove the wiring harness from the 1996 Chevy Cavalier blower motor. Remove the blower motor retaining bolts. Remove the blower motor fan. Reverse the process to install the new blower motor.

User Avatar

Check to see if you have 12 volts at the blower motor. If yes then the blower motor is bad. If no, then the resistor, relay, or fuse is bad.

User Avatar

To replace the blower motor on a C230 compressor of a Mercedes Benz, remove the bolts holding the motor in place. It is next to the blower, under the passenger side of the dashboard. Replace with new and reinstall the bolts.

User Avatar

Remove the wiring harness from the back of your 1996 Chevrolet blower motor. Remove the blower motor retaining bolts. Remove the fan from the blower motor. Reverse the process to install your new blower motor.

User Avatar

Remove the wiring harness from the back of your 1993 Chevrolet Camaro blower motor. Remove the blower motor retaining nuts. Remove the fan from the front of the blower motor. Reverse the process to install the new blower motor.

User Avatar

Begin by removing the wiring harness from the back of your blower motor. Remove the blower motor retaining bolts. Remove the fan from the front of the blower motor. Reverse the process to install your new blower motor.

User Avatar

o4 grand prix gt blower motor were is it located

User Avatar

The blower motor is under the heat box on the passenger side of the interior. To replace it you disconnect the connector to the electric motor then take out 5 screws around the perimeter of the bottom of the blower.

User Avatar

Begin by removing the wiring harness from the back of your 1974 Beetle blower motor. Remove the blower motor retaining bolts. Remove the blower motor fan. Reverse the process to install your new blower motor.

User Avatar

The blower motor speed resistor is burned out. You can replace only the resistor but the resistor probably burned out because the blower motor is going bad. If you want to fix it for good, replace both the blower motor and blower motor speed resistor.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.