Ford Windstar
Ford Ranger XL
1982-1994 Chevy Cavaliers
1995-2005 Chevy Cavaliers

How do you replace the bolts in the front stabilizer bar for a 1990 Chevy Cavalier?

565758

Top Answer
User Avatar
Wiki User
Answered
2011-09-12 20:54:19
2011-09-12 20:54:19

Hey Jenny==Go to the parts store and get the bolts then you will see what they look like. Then get under the car and change them out. This OS not a hard job. Goodluck. Joe

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


TAke off the left kick panel and there are bolts holding it on.

NEED help is there a diagram with the bolts in the backseat of a 1998 chevy cavalier?

Remove the belt from your 2004 Chevy Cavalier alternator. Remove the alternator wiring harness. Remove the alternator retaining bolts. Reverse the process to install your new alternator.

Begin by removing the 2003 Chevy Cavalier alternator belt. Remove the wiring from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install your new alternator.

Disconnect the positive cable from your 2003 Chevy Cavalier battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.

Remove the belt from your 2002 Chevy Cavalier alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install your new alternator.

My 1997 Chevy Cavalier with 2.2L motor used a 15mm socket.

In order to replace a timing chain for a 2003 Chevy Cavalier, a person will need remove the oil pan, crankshaft pulley and hub, timing cover bolts, and timing cover. Then the timing cover gasket, timing cover and bolts, crankshaft pulley, and oil pan will need to be installed.

Remove serpentine belt. Remove alternator. The bolts that hold the tensioner on are under the alternator.

Remove the water supply hose from the top of your 2005 Chevy Cavalier thermostat housing. Remove the thermostat housing retaining bolts. Lift the old thermostat out and drop in the new thermostat.

The 1997 Chevy Cavalier dashboard is held in place with for retaining bolts and eight retaining clips. Remove the retaining bolts and pry outward on the retaining clips.

Remove the water supply hose from your 1988 Chevy Cavalier thermostat housing. Remove the thermostat housing bolts. Lift the old thermostat out and drop in the new thermostat.

The 2000 Chevy Cavalier windshield washer tank is held in place with for retaining bolts. Remove the retaining bolts and the windshield washer tank will come out.

Remove the wiring harness from the 1996 Chevy Cavalier blower motor. Remove the blower motor retaining bolts. Remove the blower motor fan. Reverse the process to install the new blower motor.

take the plastic cover guard off and it is 2 bolts right on top take them out and it is free

The 2000 Chevy Cavalier cooling fan shroud is held in place with 10 retaining bolts. Remove the retaining bolts and the cooling fan shroud will come off.

If the head is removed you must always replace the bolts.

Simply remove the 4 bolts holding it on and replace it.

Remove the inside door panel of your 2002 Chevy Cavalier. Remove the window motor wiring harness. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install the new window motor.

Remove the inside door panel of your Chevy Cavalier. Remove the drivers side mirror wiring harness, if the mirror is electric. Remove the drivers side mirror retaining bolts. Reverse the process to install the new drivers side mirror.

Remove the a/c ducts then the wires and mounting bolts under the dash. Then the knobs on the front and nuts under them then work the rakio out from under the dash.

Drain the water from your 1989 Chevy Cavalier cooling system. Remove the water return hose from the water pump. Remove the water pump belt. Remove the water pump retaining bolts. Reverse the process to install the new water pump.

The 1997 Chevy Cavalier starter bolt size is 9/16 by 3.5" inches long. You will need three starter bolts to secure the starter.

There is 2 bolts on the top that you have to remove, and one underneath, and one electrical plug, and one wire that goes to the starter. Good luck.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.