remove the little triangle pannel at the front of the door at the top of the trim and there are 3 nuts undo them they are 10mm socket or spanner as simple as that
Remove inside door panel, remove mirror assembly holding bolts, unplug electrical connection and reinstall.
How do you replace a break light switch on 1995 Chevy Tahoe
Use a hammer
The side view mirror on a 1995 Chevy Corsica is mounted by screws. Remove the screws and panel for the mirror on the inside of the vehicle. Pull and replace the unit.
Use strong glue to attach mirror
check your answer
== ==
how do you replace the drivers window clips on the glass od a 1995 grand prix se 2 door?
Remove the door panel and the mirror is held on with bolts.
The mirror needs to be removed from the inside of the car, the plastic molding that goes between the dash and the roof of the car needs to be removed, then you can remove the screws that hold it in, but if it is a power mirror, you will need to disconnect the wiring harness, the wiring harness should be nearby.
To replace the brake light switch on a 1995 Tahoe, first disconnect the battery and push the switch up at the ends towards the firewall. Slide the switch towards the passenger side. This will release the brake light switch from the actuator point.
There is no shutoff switch in a 1995 Tahoe, or most cas.