Be notified when an answer is posted
Really ain't no fixing a brake cable. Replace it with a new cable.
The Ford expedition emergency brake cable is held in place with swivel nuts on each end of the cable. Turn the swivel nuts to the left, to remove the cable. Reverse the process to install your new emergency brake cable.
If it helps out, check out youtube and type this in: How To Install Replace Emergency Brake Cable 1AAuto.com. This guy helps a lot!
Your GMC Suburban emergency brake release cable is held in place with a swivel nut on each end of the cable. Loosen the swivel nut to remove the cable. Reverse the process to install the new emergency brake release cable.
You can disconnect your emergency brake light removing the emergency brake cable. The emergency brake cable can be removed by turning the swivel nuts to the left, on each end of the cable.
Replace emergency brake cable Secure emergency brake pedal in its upper most position (released)
The emergency brake cable is held in place with swivel nuts on each end of the cable. Turn the swivel nuts to the left. The emergency brake cable will come off.
Fix the emergency brake
You can adjust your 1989 Chevy Corvette emergency brake into different ways. The emergency brake will have an adjustment bolt on the brake pad. The emergency brake cable can be adjusted to shorten or lengthen the cable.
95 chev S10 emergency brake cable does not reach to attach front cable to rear cable. I have adjusted nut as far as it will go and am still 2' short to join the front and rear cables.
Sound like you have a e-brake cable that is frozen. Take cable off at wheel end and if cable retracts then look inside the brake assemble. If it don't, replace the cable.
The 1996 Toyota Tercel brake cable runs from the emergency brake lever to the rear wheel. The emergency brake is on the passenger side rear wheel.