I believe its a 893 bulb. You need to remove the headlight shroud that covers the headlight.(3 Screws) This will have to be done when you turn on your headlights. You can either leave the headlights on and perform the replacement. Or you can turn on your headlights and disconnect them so they stay in the open position. The connector is located just behind of the headlight. Once the shroud is removed you will be able to gain access to the fog lights. To remove the bulb, simply twist the socket counter clockwise and inspect the bulb. It just takes a little time but it can be done.
You will have to have the hood up in order to get your hand in to disconnect the old bulb once you remove the headlight shroud. Also, I hope your hand is "small" enough to fit into the tight space. Good luck! It took me about 5 minutes to replace the bulb.
Open the hood and then turn on the head lights. When the light opens you be able to reach in and twist the bulb out. You will certainly loose some skin off your hand when you do it!
the headlight assembly needs to come out in order to replace the bulb.
Change the bulb and check to see if it's not grounding out.
Remove the dome light lens, pull the old bulb out, and replace with new bulb; replace the lens.
Replace the bulb that is burnt out.
unscrew the 2 screws holding the light in. pull the light out. replace the light.
You need a star point screwdriver. Remove the 2 screws pull out light assembly. Remove the light socket from housing and replace bulb. replace in reverse order. 5 minutes.
yes you do
i dont know and i need help replacing the front left turn signal bulb on a 2006 c6 corvette coupe z51
Just unscrew it.
REPLACE THE BULB
If you can't get to the back of the light assy you have to remove it from the vehicle and the bulb screws in.