Honda Accord
Honda Accord LX
Turn Signals and Hazard Lights

How do you replace the front turn signal bulb located on a 1991 Honda Accord?

Top Answer
User Avatar
Wiki User
2015-07-15 20:41:42
2015-07-15 20:41:42

Hey Melissa==You can remove the bulb fronm the rear of the light and replace it. GoodluckJoe

For Melissa and others:

I will describe this as a left side change. Reverse left/right directions for the other side.

Use a Philips head screw driver to remove the turn signal housing/lens assembly. The screw remains captive in the housing.

The screw is hard to see. Your screwdriver will fit in a hole in the bumper cover, just to the left of the orange signal lens, at an angle, pointing toward the left front wheel.

After a few turns, gently pry the lens from the left end outward toward the right. If it doesn't come nicely, turn the screw some more.

Once the housing is out, you can easily turn the bulb holder 1/4 turn to remove it and subsequently the bulb.

I'd add that the right side of the lens housing (for the left side change described above) is held in only by a tab--so sliding the lens from right to left as you pry on the left side should pop the whole housing out.

Related Questions

User Avatar

where is the water pump located on 1997 honda accord

User Avatar

If a turn signal does not blink on a 1996 Honda Accord that it is time for it to be changed. To change the bulb and locate the light housing and remove the older light. Replace the light.

User Avatar

How do you replace a radiator on a 1991 Honda Accord

User Avatar

how do you replace the radiator on a 2003 V6 Honda Accord

Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.