Can only be accessed by dropping plastic apron under front end. This is held in with numerous plastic snap in retainers. Car should be raised (driven up on blocks) to safely access this area due to low ground clearance. Be sure to block rear wheels and set parking brake and gear in park.
To remove retainers; pry out center plastic pin and then pull out the plastic plug. Take care not to damage as you will need to reinstall them, first the plug and then the plastic pin to secure them. Replace both lamps so you will not have to do it again too soon.
It is a dirty job and should be left to a shop for repair if possible.
Replace axle on 2001 buick Lesabre
AnswerFront or rear?front
How do you replace the front turn signal bulb located on a 2001 Buick Century?"
The way that replace a window regulator in a 2003 Buick LeSabre front drive side is by removing the door panel. Next, disconnect the electrical connector on the regulator and replace.
This is the turn signal bulb in the front bumper - passenger's side.
Hey Phill=the front ones can be gotten to from the rear of the light assy and on some of the cars you can get to the rear ones in the trunk. GoodluckJoe
Whats the procedure for replacing a 2002 Buick Lesabre front strut.?
I have a shimmy or small vibration while driving the interstate on my 1994 buick lesabre - if i was to check the front and rear bearings - how would i do that and what would i look for
I want to try and remove and replace my front struts on my 1995 buick lesabre is there a chance of seeing on line pictures of how to?
118 ft lbs 1997-2004 Buick LeSabre
5.25"
Front wheel drive