First off, it has to be pressed on with a 1 to 5 ton press. So for a DIY person it doesnt make much sence going through the whole procedure. Sorry.
But if your hell bent on doing it, message me.
A wheel lug stud broke off do you have to replace the hub or does the stud drive out?
No, the bearing is pressed into the knuckle.
You have to buy the wheel bearing assembly.
Front or rear?
No, the entire assembly needs to be replaced.
You replace the wheel bearing hub assembly - it has studs, bearings and wheel speed sensor around $100 part
The front wheel bearings must be pressed into and out of the spindle/hub assembly. You will need to take the spindle assembly to an automotive machine shop to have this done.
Front
Rear or front? rear
The front bearing for a Dodge Stratus is attached to the Hub. To replace it remove all the components on the hub assembly. There are three bolts that hold the assembly in place. Loosen the bolts and pry out the hub. Replace the unit.
the same way you would replace any hub assembly, take the wheel off, take off any bolts that connect the hub to the driveshaft and then replace it
How do you replace spark plugs on a 2004 Sable - Taurus?
You can change the front wheel bearings on your 2000 Buick Regal without replacing the entire hub assembly. You can change each individual wheel bearing, if you choose.