Dis-connect battery hot wire, remove air cleaner and other components in order to remove the intake manifold. Remove head, insert each bolt into cardboard and mark which hole each came out of. The same goes for all parts removed, mark each with arrows, numbers or whatever it takes so as to replace all back to how you found them before starting your repairs. Remove defective head gasket, clean gasket material off both the block and the head with a putty knife or other tool. Install new gasket, replace head and all other parts in reverse order and you're done. Of course you want to use good gasket sealer for the manifold and hose connections. DO NOT USE GASKET MATERIAL BETWEEEN THE HEAD AND ENGINE BLOCK. ONLY THE NEW HEAD GASKET GOES THERE!!!!!!!!!!
The cost to replace a head gasket on a 1995 Chevy Impala is between $1800 and $2200. This job is very labor intensive and requires replacing many of the engine major gaskets.
Remove the cylinder heads from your Chevy engine. Remove the head gasket and clean the head gasket surface. Put the new head gasket on and reverse the process.
You do not repair a head gasket you replace it with a new gasket which requires removing the head.
bad oil rings==head gasket== valve seals
The only repair is to replace the head gasket.
a bad head gasket or intake manifold gasket.
They only Head Gasket I had to replace was on a Chevy Malibu 1999. Cost me about $1400
Price for parts on 99 tahoe head gasket
Remove the head and replace the gasket. No other way to fix it.
Remove the cylinder had from your 1997 Chevy Astro engine. Remove the head gasket and clean the surface. Put the new head gasket on and reverse the process.
yes you can replace the head gasket. you can on all engines. you just gotta take the head off
The head gasket on a 1999 Chevy Malibu is replaced by removing the coolant, intake manifold, and retaining bolts. The cylinder head can then be removed, the gasket replaced, and everything reassembled.