To change headlights bulbs on 2001 Pathfinder Carefully remove rubber protectors around bulb Push bulb in and remove retaining ring, bulb will then pull out Do NOT touch new bulb as it will shorten life of bulb, use gloves or soft rag Reverse procces to install To change entire assembly remove screws from inside motor area, assembly is held by 4 screws and they are inserted into fragile plastic nuts (they get brittle with age)
detach the bulbs and remove the clips behind the headlight assembly
it is behind the passenger side headlight assembly. you will have to remove the headlight assembly to replace it.
go to back of headlight assembly and twist it out.
Look to the back of the headlight assembly. There will be a round sleeve where the wiring goes into the headlight. Twist this counterclockwise to turn the head light bulb assembly. Pull back on the assembly to remove it from the headlight casing. Replace with new headlight bulb.
Open the hood, remove the two locks that hold the headlight assembly in place, with the two locks removed you can wiggle the headlight assembly out and gain access to the back side of the assembly to remove and replace the headlight bulb.
There are 4 screws that hold it on.
To replace the headlight assembly on a 2006 Jetta, remove the front grill. Then remove the headlight assembly by taking off the screws that secure it in place. Replace with new.Ê
There is 2 large plastic screws that hold the headlight assembly`s in. Simply unscrew them and lift the headlight assemblies out then unhook take the bulbs out.
The headlight deflectors are located in the headlight assembly. They can be difficult to remove and replace, because you have to feel your way around in the beginning.
1) open the hood. 2) Carefully remove the three screws holding the headlight assembly in place. In my case the screws were black. Be careful as they are screwed into plastic. 3) Carefully slide the headlight assembly out. At this point you can replace the headlight bulb, turn signal bulb, or the entire headlight assembly. To replace the headlight bulb turn the collar holding the bulb in counter clockwise. Pull the bulb out of the headlight assembly. Replace the bulb. Insert the bulb into the headlight assembly insert the collar and turn clockwise until it locks. 4) Carefully insert the headlight assembly back into place. 5) Replace the three screws removed in step 2 being carefull not to over tighten.
Hi, You have to remove the entire headlight assembly to get to the bulb, which is located in the back of the assembly. There are three wing nuts that hold the assembly in, and those will have to be removed. Then remove the side signal assembly first, then the headlight assembly. I have provided a link that shows exactly how this is done and where these wing nuts are. Good Luck
Remove the wiring harness from the back of your headlight assembly. Remove the headlight assembly retaining bolts. Reverse the process to install your new headlight assembly.