read the manual
the complete headlight assembly has to come out to replace the bulbs, there are plastic pull pins that look like large horseshoes that have to be pulled for the assembly to come out.
How do i replace the purge valve on a 1999 Chevy Monte Carlo
There are two clips on the wall that holds the headlights. Push the clips away and pull the headlight housing out.
There is two clips that you have to take off the back of the headlight. then the whole thing will come out so you can get to the light that you are trying to replace.
It is built into the headlight switch.
the headlight assembly needs to come out in order to replace the bulb.
The headlight fuse located on a 1995 Chevy Tahoe is under the hood. It is located in the fuse box on the passenger side.
more then likely w/ no more info then is provided there is a silver rod on top of the headlight pod you slide to the side then the whole light will come out and you can replace the bulb and reinstall.
Open the hood, remove the two locks that hold the headlight assembly in place, with the two locks removed you can wiggle the headlight assembly out and gain access to the back side of the assembly to remove and replace the headlight bulb.
were is the bcm located on a 2000 monte carlo