Reach behind the light assembly and unplug the connector, using a screwdriver to hold the clip out of the way. Turn counter-clockwise to remove the assembly. Push in and counter-clockwise to remove the bulb. Installation is opposite. From my HAYNES manual.
there are little clips on the back you take off and it should just slide out
There is a screw type ring over the bulb, turn it counter-clockwise to unhook from housing unit, remove bulb assembly from Headlamp housing. You can either unhook the wiring or just replace the bulb while its out, and then install new bulb and reverse steps in order to put back to normal.
passenger side of engine compartment between engine and firewall red handle
Thunder Bay is located 2.5 degress north in Canada!
yes they do, driver and passenger airbags
Thunder Springs is the headwater of Thunder River, a perennial tributary of Tapeats Creek, itself a tributary of the Colorado River.
The OBD connector is located slightly underneath the dashboard on the passenger side of the car, right next to the center console. It is black in color and is the same shape as your OBD reader "plug".
Should be a metal round thing floor, brake pedal area.
The Wapawekka hills and Thunder hills are in Saskatchewan.
Thunder Bay is a large bay located on the northwest shore of Lake Superior. Thunder Bay is a popular tourist area.
Thunder Mountain is located in the Ringwood State Park, close to New York City. It is only 25 miles away from the Tappan Zee Bridge, thus is easy to get to.
Gillette, Wyoming, USA.