answersLogoWhite
Ask
Headlights Tail and Brake Lights
Pontiac Grand Am
Grand Am SE

How do you replace the headlight bulbs in a 2000 Pontiac Grand Am and clean out the headlight lens covers?

105106107
Answer

Top Answer
User Avatar
Wiki User
2006-04-05 03:31:12
2006-04-05 03:31:12

Remove the 8 plastic clips that hold down the plastic guard. Pull the centers out of the 8 plastic clips to remove them. Remove plastic guard. Next there are 2 clips that hold the headlight assembly in place. Push inward and pull up on the clips. The inboard clip can be removed completely, the outer clip just needs pulled up. Now you can roll the headlight assembly out of the car. Unscrew the black retaining ring around the light bulb. Unplug the electrical wires from back of old bulb. Reassemble in reverse. When putting the headlight assembly back in be sure to align the nylon pieces into the slots where the 2 clips go.

12
0

Related Questions

User Avatar

There are bolts surrounding the headlamp. remove these and the wires.

User Avatar

where is the headlight relay in a 1995 grand am

User Avatar

If it's the same as a 96 Pontiac Grand AM GT, than you would need a 10mm socket and rachet there are three bolts on top of headlight remove these and just pull out headlight. Disconnect the wire going to the bulb you want to replace.

User Avatar

There are bolts surrounding the headlamp. remove these and the wires.


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.