Begin by removing the wiring harness from the back of your 1974 Beetle blower motor. Remove the blower motor retaining bolts. Remove the blower motor fan. Reverse the process to install your new blower motor.
Continental/VDO New A/C Heater Blower Motor PM4820
To replace the heater blower motor: First unplug the wire connectors. Then remove the screws and the motor will pull out. Reverse the process to reinstall the blower motor.
Remove the wiring harness from the back of your 1980 Chevy Camaro heater blower motor. Remove the blower motor retaining bolts. Remove the fan from the front of the blower motor. Reverse the process to install the new blower motor.
replace heater relay and or heater blower motor
Replace the resister, if that doesn't work replace the blower motor.
Remove the wiring harness from the back of your 1996 Chevrolet blower motor. Remove the blower motor retaining bolts. Remove the fan from the blower motor. Reverse the process to install your new blower motor.
have you checked the fuse if so then you will need to replace the resistor for the blower hig and low dettings have you checked the fuse do you have 12 volts to blower if so then you will need to replace the resistor for the blower replace the blower motor
The blower motor, on your 2001 Volkswagen beetle, can be found in the front trunk compartment. The blower motor will be attached to the firewall, on the passenger side.
Blower motor: remove the glove box and you will see the blower motor and blower resistor.
The heater blower motor will most likely be located under the dash by the heater core assmebly, but first you need to be sure that that's the problem, it could just be wiring to the blower motor. Shouldnt be too hard to replace, and should be simple to find,
The resistor motor may have went out if the heater blower quit working on a 2004 F-250 Truck. The cost to replace the motor is approximately $200.
The blower motor speed resistor is burned out. You can replace only the resistor but the resistor probably burned out because the blower motor is going bad. If you want to fix it for good, replace both the blower motor and blower motor speed resistor.