bolt pattern for a 1994 ford thunderbird
Replace the heater core. It is leaking.
you might be able to just go through the back of the glovebox to get to the heater core
1994!get a new car
No. You need to replace the tensioner.
No you can not. You need to replace the tensioner.
You can replace the locking cylinder, on your 1994 Ford Thunderbird, by removing the inside door panel. The locking mechanism will be visible with the door panel removed.
On the firewall, under the hood, you will find the inlet and outlet hoses.
The dash has to be removed to gain access to the heater box. The heater box then comes out and is split open to replace the core.
For a 1994 Ford Thunderbird : ( DOT 3 brake fluid , meeting Ford specification ESA-M6C25-A )
A 1994 Ford Thunderbird is ( OBD I )
behind the dash....
replace motor under the seat
How do you replace a heater core in a 1998 ford expedition?"
yes. it is located behind the dash
Follow the top radiator hose back to the engine. This is where the thermostat is. Remove the 2 bolts and there it is.
Standard tyre size for 1994 Ford Thunderbird LX 4.6L V-8 automatic is 205/70R15
yes, you even have to remove some a/c components wich requires draining you freon unfortunately
The 1994 Ford Thunderbird motor mounts are secured with a bolt and nut running through the middle of the motor mount. Loosen the nut and pull the bolt out.