answersLogoWhite

0


Best Answer

The cover slides straight forward. Firmly pull, wiggling side to side, sliding toward the front of the car to release the latch. Gently lift straight up (the wires will remain connected to the lamp socket. Twist out bulb socket (counter clockwise) remembering the orientation for its return trip (it's a confusing socket). Or you can detach the wires from the socket to lift the entire cover away for easy access. Save yourself a half hour of service @ $95/hour.

User Avatar

Wiki User

โˆ™ 2007-12-02 16:45:53
This answer is:
User Avatar
Study guides

Add your answer:

Earn +20 pts
Q: How do you replace the high stop light bulb on a '98 Lexus ES 300?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How you you change the high mount brake light on Lexus RX300?

Remove the center piece of trim on the inside of the lift gate. it just pulls off. then push up on the two tabs at the bottom of the light to remove it. then replace bulb with the correct bulb. .....


How do you replace light bulb on high mount brake light on 1998 Mercury Villager GS?

Just unscrew it.


How do you replace the high beam light bulb on 2005 ford escape?

take out old bulb & install new bulb . if can not do this come to repair shop . i fix that .


How do you change the high mounted stop light on a Lexus Is300?

how do you change the high mounted stop light on a lexus Is300?


How do you replace a rear deck brake light on a 1992 es300 Lexus?

1992 Lexus ES300 center high mount stop (third 3rd brake light) light bulb lamp replacement procedure: Purchase the correct replacement center high mount stop (third 3rd brake light) bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information and full light bulb part numbers list. Then consult your owner's manual for the center high mount stop (third 3rd brake light) bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. If there are multiple bulbs, you may want to consider replacing all at the same time in order to keep brightness and color equal (optional).


How do you replace upper brake light bulb 2000 Lexus GS300?

2000 Lexus GS300 center high mount stop (third 3rd brake light) bulb replacement: Purchase the correct replacement center high mount stop (third 3rd brake light) bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the center high mount stop (third 3rd brake light) bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. If there are multiple bulbs, you may want to consider replacing all at the same time in order to keep brightness and color equal (optional).


How do you fix a dim tails light on a firebird?

Turn you high beams on and check your tail light. If its brighter, you have a head light bulb as a tail light bulb. 97-02 are the only ones that should do this. Find a tail light bulb and replace.(I couldn't believe it either).


How do you access the high tail light on a 2002 Lexus LS 430?

Open the trunk and there is a compartment that will expose the taillights. twist the bulb housing and pull it out.


How do you replace the bulb in high mount brake light for a 2006 Hyundai Sonata?

you need to remove the rear seat


How do you replace the bulb in the high brake light in the rear window of a 1993 Pontiac grand am?

I know it will feel like you're going to break it, but if you firmly pull, it comes off. Replace bulb and snap it back on.


How many elves does it take to fix a light bulb?

that depends on how high up the light bulb is


Plug 120V light bulb in 240V socket?

The result is depend on the capacity and the type of the bulb, if the bulb is made of the material which have the high melting point and it have the high resistance then the bulb will light and if the bulb can't afford the voltage means the resistance of is not to much high or the area of the filament is thin then the bulb will light for 1 or 2 sec after that the filament will break and the bulb will not be able to light again.

People also asked