answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered
2009-06-12 05:18:21
2009-06-12 05:18:21

Caution:On models with a Delco Loc 2 or Theftlock audio system be sure the lockout feature is turned off before proceeding * Disable the airbag system * Remove the tilt lever if equipped * Remove the upper and lower steering column covers Ignition Switch * Remove the ignition switch retaining screws * Detach the ignition switch from the steering column housing assembly and unplug the electrical connectors Key Lock Cylinder * Turn the key to the run postion * Depress the lock button and remove the key lock cylinder

001
๐Ÿฆƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


how do you replace ignition switch on a 1992 Chevy cavalier 2.2 4 cylinder


Remove the retaining ring from the top of your 1999 Chevy Cavalier ignition switch. Slide the ignition switch out and remove the wiring harness from the end of it.


How do you remove and replace wiper switch on 2002 Chevy Cavalier


how to replace an ignition switch for 2005 chevy equinox


You'll need a new ignition switch and key provided from your dealer, the bill won't be pretty!


i have 85 cavalier how you get key cycliner out


replace ighnition switch for 1985 chevlot


Remove the retaining ring at the top of your 1994 Chevy Corsica ignition switch. Slide the ignition switch out and remove the wiring harness. Reverse the process to install the new ignition switch.


You will need to remove the ignition switch retaining ring in your 2002 Chevy Astro Van. Slide the ignition switch out. Remove the wiring harness from the end of the ignition switch. Reverse the process to install the new ignition switch.


The 1966 Chevy Impala ignition switch can be removed by loosening the retaining ring at the top of the ignition switch. Remove the wiring harness. Reverse the process to install the new ignition switch.


It is located by the ignition switch on the right side of the steering column.


IGNITION ? ARE we talking ignition coil-ignition wires ignition switch-key & tumbler.


Where can I download instructions for replacing the ignition switch tumbler on a 1984 chevy pickup?


The ignition switch, or "killswitch," for a 1996 Chevy Cavalier is located inside the steering column. Replacing or repairing it requires disassembly of the steering column.



To replace an ignition switch on a 2000 Chevy Blazer remove the lower steering column and dash. Locate the ignition switch and pull the end-clip off the main harness. Remove the mounting screws from the ignition cylinder and replace the unit.



where is the ignition control module loacted on a 1997 chevy cavalier


You switch the carborator with the ac and then rewire the inside to the dashboard


Remove the ignition switch retaining nut. Pull the ignition out. Remove the wiring harness from the back of the ignition barrel. Reverse the process to install the new ignition.


With no key you will have to drill out the existing tumbler assembly from the switch in order to unscrew the ignition switch bezel.


Retaining ring from the top of your 1979 Chevrolet Scottsdale ignition switch. Slide the switch out and remove the wiring harness. Reverse the process to install the new ignition switch.


Remove the retaining ring at the top of your 1993 Chevrolet K 2500 ignition switch. Slide the ignition switch out and remove the wiring harness. Reverse the process to install the new ignition switch.


How do i change the ignition switch in a 1988 Chevy camaro




Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.