answersLogoWhite
Starters and Ignition Systems
Pontiac Sunbird
Ford F-150
Grand Am SE

How do you replace the ignition switch on a 94 Pontiac Sunbird?

686970

Top Answer
User Avatar
Wiki User
Answered 2005-11-27 16:07:21

i had to replace the ignition switch on my 94 sunbird 2 weeks ago...mine has no airbag, and hopefully for this repair yours doesnt either. you have to remove the steering wheel. on the ignition switch there is a bolt that simply screws out. i dont think i had to remove anything else...maybe the turn signal switch, but nothing major. remove the ignition switch, and replace with the new one. line up the bolt holes, and replace bolt. put steering wheel back on, and youre done.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Your Answer

Related Questions


How do you replace the ignition swith opn a 1992 Pontiac Bonneville se


No, not if it is not defective. If the ignition switch is defective then that is all you need to replace.


Begin by removing the retaining ring at the top of your 1990 Pontiac Bonneville ignition switch. The ignition switch will slide out. Remove the wiring harness from the end of the ignition switch. Reverse the process to install your new ignition switch.


probably unsrew the old ignition and disconnect it from the cars battery then replace the new ignition and reconnect it to the car battery. you may or will need to take apart the dash board somehow. or you could just ask a mechanic.


You can remove your 1997 Pontiac Bonneville ignition switch by removing the retaining ring at the top of the ignition switch. The ignition switch will slide out.


By taking it to a GM certified auto technician.


You do not need a key to replace the ignition switch.


HOW DO I REPLACE 1998 camry ignition switch?


How is the ignition key switch replaced on the 2000 Pontiac Sunfire? And after replacing the switch would I have to have it Towed to the Pontiac Dealer in order to have the car key programed to the Computer?


It's really easy the switch is in the steering colume.


Replace ignition switch for 1993 buick century?


How do you replace an ignition switch on Toyota corolla 1997


How do you replace the ignition switch on a 2000 ford expedition?


how to replace an ignition switch for 2005 chevy equinox


Ignition switch 2002 Chrysler sebring. Original key will not turn? Is there a fuse or replace the switch?


one of the map sensor or vacuum switch.


The switch is on the steering column about 18 inches from the floor under the dash. There are 2 screws that hold it on.



How do remove and replace the ignition switch of a 1983 Oldsmobile Regency?


Remove the ignition switch retaining ring. Pull the ignition switch out. Remove the wiring harness from the back of the ignition switch. Reverse the process to install the new ignition switch.




1997 Toyota Camry ignition switch removal


The ignition switch is one unit and you replace the entire thing. Do not confuse the ignition switch with the key lock tumbler. They are two different things.


Begin by removing the retaining ring at the top of your ignition switch. The ignition switch will slide out and you can remove the wiring harness from the end of the ignition switch. Reverse the process to install your new ignition switch.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.